18 Top Vacuum Desiccators

15 Jun 2017

Yifun Trade Top New 150Mm Glass Desiccator Jar 6 Lab Desiccator Dryer 15Cm Lab Drying Equipment With Glass Vacuum Connector And Stopper

Yifun Trade Top New 150Mm Glass Desiccator Jar 6 Lab Desiccator Dryer 15Cm Lab Drying Equipment With Glass Vacuum Connector And Stopper
Yifun Trade Top New 150Mm Glass Desiccator Jar 6 Lab Desiccator Dryer 15Cm Lab Drying Equipment With Glass Vacuum Connector And Stopper

Yifun Trade Top New 150Mm Glass Desiccator Jar 6 Lab Desiccator Dryer 15Cm Lab Drying Equipment With Glass Vacuum Connector And Stopper. With glass vacuum connector stopper. Usually the product will be sent in 2-5 working days and takes about 3 9 to reach you Glass vacuum Desiccator Inner diameter 150 mm, 6".

Glass Vacuum Desiccator 9 240Mm

Glass Vacuum Desiccator 9 240Mm
Glass Vacuum Desiccator 9 240Mm

Glass Vacuum Desiccator 9 240Mm. With glass vacuum connector stopper. 9", Glass Vacuum Desiccator Inner diameter 240 mm / 9".

United Scientific 55202 Polypropylene Non Vacuum Dessicators With Polycarbonate Cover 203 2Mm Diameter

United Scientific 55202 Polypropylene Non Vacuum Dessicators With Polycarbonate Cover 203 2Mm Diameter
United Scientific 55202 Polypropylene Non Vacuum Dessicators With Polycarbonate Cover 203 2Mm Diameter

United Scientific 55202 Polypropylene Non Vacuum Dessicators With Polycarbonate Cover 203 2Mm Diameter. Grease should be applied on the flanges to make it air-tight. Only difference is the absence of stopcock. Autoclavable at 120 C for 15 minutes. Non-vacuum (Plain) desiccators are physically the same as vacuum desiccators. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. These autoclavable desiccators are made of polypropylene (PP) and polycarbonate and can hold vacuum up to 740 mm Hg for 24 hours without any greasing. United Scientific Supply DESICCATOR, NON-VACUUM, WHITE BASE, PP / PC, 8", USS.

United Scientific Supply DESICCATOR VACUUM CLEAR BASE 10 USS

United Scientific Supply DESICCATOR VACUUM CLEAR BASE 10 USS
United Scientific Supply DESICCATOR VACUUM CLEAR BASE 10 USS

United Scientific Supply DESICCATOR VACUUM CLEAR BASE 10 USS. United Scientific Supply DESICCATOR, VACUUM, CLEAR BASE, 10", (1 / UN)- USS. United Scientific Supply DESICCATOR, VACUUM, CLEAR BASE, 10", USS.

Vacuum Desiccator Glass Clear I D 210Mm

Vacuum Desiccator Glass Clear I D 210Mm
Vacuum Desiccator Glass Clear I D 210Mm

Vacuum Desiccator Glass Clear I D 210Mm. 210 mm, Overall Height 320 mm, Plate Height 110 mm, Material of Construction Glass and Porcelain, Color Clear, Lid and Plate. Price For: Each Lid and Plate Material of Construction: Glass and Porcelain Item: Vacuum Desiccator Color: Clear Overall Height: 320 mm Inside Dia. Vacuum Desiccator, Inside Dia.

Huaou 150Mm Heavy Duty Clear Glass Vacuum Desiccator With Ground In Stopcock And Porcelain Plate

Huaou 150Mm Heavy Duty Clear Glass Vacuum Desiccator With Ground In Stopcock And Porcelain Plate
Huaou 150Mm Heavy Duty Clear Glass Vacuum Desiccator With Ground In Stopcock And Porcelain Plate

Huaou 150Mm Heavy Duty Clear Glass Vacuum Desiccator With Ground In Stopcock And Porcelain Plate. High quality and high grade of transparency. 150 mm Total height: 215 mm Diameter of porcelain plate: 135 mm. 150 mm, Total Height: 215 mm, Diameter of porcelain plate: 135 mm. Desiccators can be used, though not exclusively, for preserving moisture-sensitive items, protecting hygroscopic or water-reacting chemicals, as well as removing traces of water from samples that need drying. With porcelain plate and ground-in stopper. It is a vacuum desiccator, and therefore it is along with a stopcock. The sturdy glass top fits easily on the thick lip of the desiccator, and features a knob handle for removing or replacing the lid. Excellent heat resisitence.

210Mm Heavy Duty Glass Desiccator W Porcelain Drying Plate

210Mm Heavy Duty Glass Desiccator W Porcelain Drying Plate
210Mm Heavy Duty Glass Desiccator W Porcelain Drying Plate

210Mm Heavy Duty Glass Desiccator W Porcelain Drying Plate. A dessicant (not such as silica, calcined quicklime or anhydrous calcium chloride can be put in the lower chamber to be used as the drying agent. The sturdy glass top fits easily on the thick lip of the desiccator, and features a knob handle for removing or replacing the lid. It is a non-vacuum (plain) desiccator, and therefore has no stopcock. Removable Lid, w / Glass Knobbed Handle. The lips of both the lid and the desiccator itself are ground glass, and should be greased with petroleum jelly before use. In addition to helping create an air-tight seal, the grease also helps cushion the lid when it is set down in place. Desiccators can be used, though not exclusively, for preserving moisture-sensitive items, protecting hygroscopic (water absorbing) or water-reacting chemicals, as well as removing traces of water from samples that need drying. To help prevent damage from being set down too forcefully, the lid can be carefully slid on, or off, of the desiccator once greased. With thick walls and a sturdy, removeable, 7.25", perforated porcelain drying plate, this 8.5", soda lime glass desiccator is perfect for larger items that require drying. Drying Plate Diameter: 7.25". Upper Chamber: 8.5", 210 mm diameter 4.33", (110 mm) height. Lower Chamber: 6.5", 165 mm diameter 2", (50 mm) height.

Corning Pyrex Borosilicate Glass Large Top Desiccator With 24 29 Standard Taper Stopcock 5 8L Capacity

Corning Pyrex Borosilicate Glass Large Top Desiccator With 24 29 Standard Taper Stopcock 5 8L Capacity
Corning Pyrex Borosilicate Glass Large Top Desiccator With 24 29 Standard Taper Stopcock 5 8L Capacity

Corning Pyrex Borosilicate Glass Large Top Desiccator With 24 29 Standard Taper Stopcock 5 8L Capacity. Gas purge desiccators use a gas port to introduce nitrogen or other gasses, creating a controlled environment. The vacuum is rated 1 atmosphere. The ground flange has an inside diameter of 200 mm, and the plate diameter is 190 mm. Bowl volume is 5.8 L. Borosilicate glass construction. Plate diameter is 190 mm. Vacuum desiccators have a stopcock that allows air evacuation from the desiccator. Desiccators are often used with desiccants, which are drying agents such as silica gel or activated charcoal placed under a removable platform. Jar with stopcock on cover. Desiccators are sealable containers used to remove water from a sample, or to preserve moisture-sensitive electronics or lab consumables, typically in laboratory, electronic, and aerospace applications. Vacuum desiccator with a 24 / 29 standard taper stopcock with tooled hose connection that serves as the vacuum inlet. Standard taper is a designation from the American Society for Testing and Materials (ASTM). The stopcock complies with ASTM E 675 and ASTM E 676. Standard desiccators are typically lidded jars used with a desiccant. Many desiccators are used with vacuum grease, which helps create a manufactures consumable glass, ceramics, and plastic laboratory tools for life science research, industrial, and educational applications. The company, founded in 1908, is headquartered in New York, NY, and makes ISO-certified products. The Corning Pyrex 3121-200 5.8 L Large Top Desiccator with 24 / 29 Standard Taper Stopcock is a borosilicate glass vacuum desiccator with the stopcock on the cover. Vacuum and gas purge desiccators may also be used with desiccants. The 24 / 29 standard taper stopcock has a polytetrafluoroethylene (PTFE) plug and a tooled hose connection that serves as the vacuum inlet. The desiccator is a covered jar and measures 315 mm in height, with a chamber depth of 125 mm.

Kartell 243025 Small Plastic Vacuum Desiccator 141Mm Size

Kartell 243025 Small Plastic Vacuum Desiccator 141Mm Size
Kartell 243025 Small Plastic Vacuum Desiccator 141Mm Size

Kartell 243025 Small Plastic Vacuum Desiccator 141Mm Size. Fits plate diameter 141 mm. Removable pan holds calcium chloride or other drying agents and is non-corrosive. The vacuum retention valve (not barbed) allows air to enter slowly to prevent damage to the samples inside. Holds a vacuum of 740 mm for 24 hours. Vacuum retention valve allows air to enter slowly. Unbreakable vacuum-desiccator holds a vacuum of 740 mm of mercury (29 in) for 24 hours. Fits plate diameter 141 mm (5.55 in)- DYN-256025. Available in a easy to carry size: 141 mm. A neoprene O-ring in groove of bottom section gives an excellent seal with upper section. Neoprene O-ring gives excellent seal.

Bel Art F42031 0000 Space Saver Polycarbonate Polypropylene Desiccator 0 20 Cu Ft

Bel Art F42031 0000 Space Saver Polycarbonate Polypropylene Desiccator 0 20 Cu Ft
Bel Art F42031 0000 Space Saver Polycarbonate Polypropylene Desiccator 0 20 Cu Ft

Bel Art F42031 0000 Space Saver Polycarbonate Polypropylene Desiccator 0 20 Cu Ft. Flat-top dome maximizes interior space. Use with disposable or reusable desiccant. Desiccant can be placed on or under the perforated bottom plate. Glass transparent, shatter resistant polycarbonate upper section offers unobstructed viewing of contents. Bel-Art Desiccator 197 MM Id W / O F 420310000, Each. Polypropylene lower section has excellent chemical resistance and can be used with incandescent crucibles supported on high heat plate.

Bel Art Products 420100000 Bel Art 42010 Plastic Vacuum Desiccator 140 Mm Plate Size

Bel Art Products 420100000 Bel Art 42010 Plastic Vacuum Desiccator 140 Mm Plate Size
Bel Art Products 420100000 Bel Art 42010 Plastic Vacuum Desiccator 140 Mm Plate Size

Bel Art Products 420100000 Bel Art 42010 Plastic Vacuum Desiccator 140 Mm Plate Size. The plate rests on the retaining ledge of the bottom Section and has a center hole for easy removal. A large ribbed knob at the top center for easy lifting. Color: white, clear. Large interior volume the space saving design of the Desiccator dome provides maximum interior clearances. All clear polycarbonate bottoms are available in the same sizes. Clearance above plate (mm), 122. They provide an average of 13 percent greater interior volume than standard hemispherical domes. A Neoprene O-Ring seal which does not require grease, but is not harmed If grease is used. Extra heavy walls clear polycarbonate top and choice of white polypropylene or polycarbonate bottom. This strong, shatterproof Desiccator will hold a full vacuum (29.9", Hg 759 mm) at room temperature for 24 hours and will remain air tight even If not under vacuum. Featuring a polypropylene Stopcock with a PTFE tfr plug which turns, allowing a slow, gentle entrance of air preventing unnecessary turbulence and crucible damage. The Stopcock handle is a highly visible red and has a port which accepts 1 / 4", (6.4 mm) D. A polypropylene plate 3.2 mm (1 / 8") thick with 3.2 mm (1 / 8") diameter perforations for air transfer. Choice of bottom Section: polypropylene provides excellent chemical resistance and permits the use of incandescent crucibles with standard size procelain plates. Deep vacuum Desiccator features a polypropylene bottom and polycarbonate lid high crowned lid provides maximum interior clearance. Desiccator holds 29", Hg for 24 hours. Material: polycarbonate cover, polypropylene body. Diameter (cm), 14.9. Diameter (inchshort), 5.875.

Bel Art F42029 0000 Techni Dome Polycarbonate Vacuum Desiccator 2 3 Cu Ft

Bel Art F42029 0000 Techni Dome Polycarbonate Vacuum Desiccator 2 3 Cu Ft
Bel Art F42029 0000 Techni Dome Polycarbonate Vacuum Desiccator 2 3 Cu Ft

Bel Art F42029 0000 Techni Dome Polycarbonate Vacuum Desiccator 2 3 Cu Ft. Laboratory-grade, chemical-resistant polycarbonate bottom and top. Large vacuum desiccator with one gas port that can be closed for use with standard desiccants. All contents can be easily viewed through the desiccator's clear polycarbonate top and bottom. Hemispherical top and bottom. Has a 65 L internal volume that can hold items up to 45 cm (18", tall or wide. Comes with two removable polypropylene shelves, 36.5 cm and 22.5 cm (14.5", and 9") in diameter.

Changlong Instrument 12 Glass Vacuum Desiccator Jar Lab Dessicator Dryer Diameter 300Mm Heavy Wall

Changlong Instrument 12 Glass Vacuum Desiccator Jar Lab Dessicator Dryer Diameter 300Mm Heavy Wall
Changlong Instrument 12 Glass Vacuum Desiccator Jar Lab Dessicator Dryer Diameter 300Mm Heavy Wall

Changlong Instrument 12 Glass Vacuum Desiccator Jar Lab Dessicator Dryer Diameter 300Mm Heavy Wall. The product usually takes 7 13 to arrive to your hand after your is confirmed Product Glass vacuum Desiccator Inner diameter 300 mm, 12". With glass vacuum connector stopper Unit Type: piece Weight: 10.000 kg (22.05 lb.) Size: 33 cm x 33 cm x 41 cm (12.99 in x 12.99 in x 16.14 in).

SEOH Plastic Vacuum Desiccator 250Mm

SEOH Plastic Vacuum Desiccator 250Mm
SEOH Plastic Vacuum Desiccator 250Mm

SEOH Plastic Vacuum Desiccator 250Mm. Dimensions: Top Dome Material: Polycarbonate. Hold vacuum up to 740 mm Hg for 24 hrs without greasing. Works great in Labs, Classrooms or for Home Experiments! The dome, molded in rigid and transparent polycarbonate, gives a clear view of the desiccant placed inside. These autoclavabale vacuum desiccators can hold vacuum up to 740 mm Hg for 24 hrs without greasing. Transparent lid gives clear view of dessicant. Fitted with a self lubricating PTFE plug. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The knob on the top provides easy handling of the dome. These vacuum desiccators have a polypropylene bottom and polycarbonate top. The lower part is made of polypropylene. The polypropylene stopcock is fitted with a self lubricating PTFE plug. Bottom Bowl Material: Polypropylene. Flange OD: 10.87 Inch (276 mm). Flange ID: 9.45 Inch (240 mm). Plate OD: 8.98 Inch (228 mm). Total Height: 12.21 Inch (310 mm). Max Clearance from Plate: 8.15 Inch (207 mm). Lower Chamber Height: 2.60 Inch (66 mm). Lower Chamber Diameter: 8.27 Inch (210 mm). Plate to Flange Height: 2.76 Inch (70 mm). Stopcock Length: 2.76 Inch (70 mm).

United Scientific Supply DESICCATOR VACUUM CLEAR BASE 8 USS

United Scientific Supply DESICCATOR VACUUM CLEAR BASE 8 USS
United Scientific Supply DESICCATOR VACUUM CLEAR BASE 8 USS

United Scientific Supply DESICCATOR VACUUM CLEAR BASE 8 USS. United Scientific Supply DESICCATOR, VACUUM, CLEAR BASE, 8", (1 / UN)- USS. United Scientific Supply DESICCATOR, VACUUM, CLEAR BASE, 8", USS.

SEOH Clear Plastic Vacuum Desiccator 250Mm

SEOH Clear Plastic Vacuum Desiccator 250Mm
SEOH Clear Plastic Vacuum Desiccator 250Mm

SEOH Clear Plastic Vacuum Desiccator 250Mm. Dimensions: Top Dome Material: Polycarbonate. An internal groove is provided on the flange to hold a silicon rubber O-Ring. Hold vacuum up to 740 mm Hg for 24 hrs without greasing. These autoclavabale vacuum desiccators can hold vacuum up to 740 mm Hg for 24 hrs without greasing. Transparent lid gives clear view of dessicant. Fitted with a self lubricating PTFE plug. These vacuum desiccators are made of clear polycarbonate. The dome, molded in rigid and transparent polycarbonate, gives a clear view of the desiccant placed inside. Bottom Bowl Material: Polycarbonate. The knob on the top provides easy handling of the dome. Works great in Labs, Classrooms or for Home Experiments! The polypropylene stopcock is fitted with a self lubricating PTFE plug. Flange OD: 10.87 Inch (276 mm). Flange ID: 9.45 Inch (240 mm). Plate OD: 8.98 Inch (228 mm). Total Height: 12.21 Inch (310 mm). Max Clearance from Plate: 8.15 Inch (207 mm). Lower Chamber Height: 2.60 Inch (66 mm). Lower Chamber Diameter: 8.27 Inch (210 mm). Plate to Flange Height: 2.76 Inch (70 mm). Stopcock Length: 2.76 Inch (70 mm).

Bel Art Products 420200000 Bel Art 42020 Plastic Vacuum Desiccator 190 Mm Plate Size Gallons

Bel Art Products 420200000 Bel Art 42020 Plastic Vacuum Desiccator 190 Mm Plate Size Gallons
Bel Art Products 420200000 Bel Art 42020 Plastic Vacuum Desiccator 190 Mm Plate Size Gallons

Bel Art Products 420200000 Bel Art 42020 Plastic Vacuum Desiccator 190 Mm Plate Size Gallons. A large ribbed knob at the top center for easy lifting. A Neoprene O-Ring seal which does not require grease, but is not harmed If grease is used. The plate rests on the retaining ledge of the bottom Section and has a center hole for easy removal. Color: white, clear. All clear polycarbonate bottoms are available in the same sizes. Large interior volume the space saving design of the Desiccator dome provides maximum interior clearances. Clearance above plate (mm), 157. They provide an average of 13 percent greater interior volume than standard hemispherical domes. Extra heavy walls clear polycarbonate top and choice of white polypropylene or polycarbonate bottom. This strong, shatterproof Desiccator will hold a full vacuum (29.9", Hg 759 mm) at room temperature for 24 hours and will remain air tight even If not under vacuum. Featuring a polypropylene Stopcock with a PTFE tfr plug which turns, allowing a slow, gentle entrance of air preventing unnecessary turbulence and crucible damage. The Stopcock handle is a highly visible red and has a port which accepts 1 / 4", (6.4 mm) D. A polypropylene plate 3.2 mm (1 / 8") thick with 3.2 mm (1 / 8") diameter perforations for air transfer. Choice of bottom Section: polypropylene provides excellent chemical resistance and permits the use of incandescent crucibles with standard size procelain plates. Deep vacuum Desiccator features a polypropylene bottom and polycarbonate lid high crowned lid provides maximum interior clearance. Desiccator holds 29", Hg for 24 hours. Material: polycarbonate cover, polypropylene body.

SEOH Plastic Vacuum Desiccator 150Mm

SEOH Plastic Vacuum Desiccator 150Mm
SEOH Plastic Vacuum Desiccator 150Mm

SEOH Plastic Vacuum Desiccator 150Mm. Transparent lid gives clear view of dessicant. Fitted with a self lubricating PTFE plug. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The dome, molded in rigid and transparent polycarbonate, gives a clear view of the desiccant placed inside. Hold vacuum up to 740 mm Hg for 24 hrs without greasing. The knob on the top provides easy handling of the dome. Works great in Labs, Classrooms or for Home Experiments! Dimensions: Top Dome Material: Polycarbonate. These autoclavabale vacuum desiccators can hold vacuum up to 740 mm Hg for 24 hrs without greasing. These vacuum desiccators have a polypropylene bottom and polycarbonate top. The lower part is made of polypropylene. The polypropylene stopcock is fitted with a self lubricating PTFE plug. Bottom Bowl Material: Polypropylene. Flange OD: 6.73 Inch (171 mm). Flange ID: 5.91 Inch (150 mm). Plate OD: 5.43 Inch (138 mm). Total Height: 8.03 Inch (204 mm). Max Clearance from Plate: 4.84 Inch (123 mm). Lower Chamber Height: 1.57 Inch (40 mm). Lower Chamber Diameter: 5.12 Inch (130 mm). Plate to Flange Height: 1.65 Inch (42 mm). Stopcock Length: 2.76 Inch (70 mm).