20 Best Inline Flow Indicators

14 Apr 2019

Asahi America Labcock PVC Ball Valve Inline Unibody Lever 1 4 NPT Male

Asahi America Labcock PVC Ball Valve Inline Unibody Lever 1 4 NPT Male
Asahi America Labcock PVC Ball Valve Inline Unibody Lever 1 4 NPT Male

Asahi America Labcock PVC Ball Valve Inline Unibody Lever 1 4 NPT Male. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Male NPT threads for connecting to female threaded pipe fittings. Calibrated flow indicator to monitor flow. The company, founded in 1977 and headquartered in Malden, MA, meets International Organization for Standardization (ISO) 9001: 2008 and National Sanitation Foundation (NSF) 61 standards. PVC for less weight than valves made from metals. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. This Asahi America Labcock PVC ball valve is made of PVC (polyvinyl chloride) for less weight than metals, and has a lever handle for on / off manual control and a calibrated flow indicator to monitor flow. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. This inline ball valve is suitable for chemical processing and water and wastewater applications. Asahi / America, Inc. Inline valve for connecting two pipes going in the same direction. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves may have a handle or lever that aligns with the ball s position (open or closed) for manual operation. Lever handle for on / off manual control. manufactures corrosion-resistant fluid flow products, including thermoplastic valves, actuators, flow meters, tubing systems, and single and double containment piping systems. They are primarily used in air, gas, liquid, and steam applications. Asahi America 1080002 Labcock PVC Ball Valve, Inline, Unibody, Lever, 1 / 4", NPT Female x NPT Male. This inline valve has 1 / 4", male National Pipe Taper (NPT) threads for use with female threaded pipes going in the same direction, and a single-piece valve construction for reduced possibility of leakage. It is pressure rated to 150 pounds per square inch (psi) at 120 degrees F (water), and has a full vacuum rating of 29.9", Hg. This valve has an EPDM (ethylene propylene diene monomer) seal for increased water resistance and meets NSF International / American National Standards Institute (NSF / ANSI) 61 standards for potable water use.

SMC AS4002FSG 13 Speed Controller Inline With Indicator

SMC AS4002FSG 13 Speed Controller Inline With Indicator
SMC AS4002FSG 13 Speed Controller Inline With Indicator

SMC AS4002FSG 13 Speed Controller Inline With Indicator. Indicator Direction: 0. Body Size: 400 (1 / 2 Standard). flow control speed controller, inline, with indicator.

Arrow Pneumatics F553AFW 3 8 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 175 Psi

Arrow Pneumatics F553AFW 3 8 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 175 Psi
Arrow Pneumatics F553AFW 3 8 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 175 Psi

Arrow Pneumatics F553AFW 3 8 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 175 Psi. Pop-up indicator indicates abnormal condition such as plugged element or excessive flow. Black coated aluminum housing. black coated metal bowl with liquid level sight. In line or modular installation. Critical protection requires changing element at regular intervals. 03 micron fiber element.

SMC AS3002FS 07 Speed Controller Inline With Indicator Pack Of 2

SMC AS3002FS 07 Speed Controller Inline With Indicator Pack Of 2
SMC AS3002FS 07 Speed Controller Inline With Indicator Pack Of 2

SMC AS3002FS 07 Speed Controller Inline With Indicator Pack Of 2. Body Size: 300 (3 / 8 Standard). Indicator Direction: 0. flow control speed controller, inline, with indicator.

Koolance INS FM14 Coolant Flow Meter

Koolance INS FM14 Coolant Flow Meter
Koolance INS FM14 Coolant Flow Meter

Koolance INS FM14 Coolant Flow Meter. Primary materials are nickel-plated brass and acrylic. A frequency circuit separately) multiplies the RPM signal to allow it to be read by most fan tachometer headers (such as those found on ATX motherboards). The RPMs represent approximate flow meter coolant in m L / min, and not revolutions. Koolance's inline flow meter provides a visual and electronic indicator of real-time coolant flow rate. Uses G 1 / 4 BSPP threads. This signal is intended to allow fan detection software (including BIOS) to enable the appropriate alarm or shutdown procedure if the flow meter impeller stops rotating. Wire length is about 28", (70 cm). Additional Materials: Nickel-Plated Brass, Brass, PMMA Acrylic, Stainless Steel, POM Acetal, Plastic, Sm Co 5 bullet; Max Temperature: 70 C (158 F) bullet; Max Pressure 25 C: 2 kgf / cm 2 (28.5 psi) bullet; Min Temperature: 0 C (32 F) bullet; Flow Rate Range: 0.5-10 LPM (7.8- 158 GPH) bullet; Accuracy (Approx.), /-5%.

Bel Art 19937 0001 In Line Flow Indicators 0 5 To 10 0 L Min Paddle Flow 3 16 To 1 4 Tubing

Bel Art 19937 0001 In Line Flow Indicators 0 5 To 10 0 L Min Paddle Flow 3 16 To 1 4 Tubing
Bel Art 19937 0001 In Line Flow Indicators 0 5 To 10 0 L Min Paddle Flow 3 16 To 1 4 Tubing

Bel Art 19937 0001 In Line Flow Indicators 0 5 To 10 0 L Min Paddle Flow 3 16 To 1 4 Tubing. Product Type: flow indicators. Number of items: 1. All models can be used with noncorrosive liquids and gases. Connect tubing to indicators via hose barb connections; 0629705 06297-05 has straight ends. All models are pressure rated to 10 PSIG. An inexpensive way to visually monitor flow of liquids and gases. Indicators give visual confirmation of flow through a clear polystyrene housing.

SMC AS1002FS 01 Speed Controller Inline With Indicator Pack Of 2

SMC AS1002FS 01 Speed Controller Inline With Indicator Pack Of 2
SMC AS1002FS 01 Speed Controller Inline With Indicator Pack Of 2

SMC AS1002FS 01 Speed Controller Inline With Indicator Pack Of 2. Body Size: 100 (M 5 Standard). Indicator Direction: 0. flow control speed controller, inline, with indicator.

Inline Flow Meters High Pressure GPM Range 1 5 32 5000 Max PSI With 3 4 NPT Port And 1 2 NPT Pressure Port 2 1 2 Display Size 221590

Inline Flow Meters High Pressure GPM Range 1 5 32 5000 Max PSI With 3 4 NPT Port And 1 2 NPT Pressure Port 2 1 2 Display Size 221590
Inline Flow Meters High Pressure GPM Range 1 5 32 5000 Max PSI With 3 4 NPT Port And 1 2 NPT Pressure Port 2 1 2 Display Size 221590

Inline Flow Meters High Pressure GPM Range 1 5 32 5000 Max PSI With 3 4 NPT Port And 1 2 NPT Pressure Port 2 1 2 Display Size 221590. Range is marked in 2 GPM increments. May be installed in hazardous areas or on applications where no power is available and may be mounted at any angle, although horizontal mounting assures best accuracy. For use in cooling systems or in hydraulic systems using oil and designed for continuous monitoring or intermittent use. Aluminum construction. Both flow indicator and thermometer (where indicated) are shielded behind impact-resistant windows. 221590, High Pressure In-Line Flow Meters, 3 / 4", NPT Port, 5000 PSI, 2 1 / 2", DISPLAY.

Plast O Matic GYW Series Polypropylene Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 1 1 2 Wafer

Plast O Matic GYW Series Polypropylene Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 1 1 2 Wafer
Plast O Matic GYW Series Polypropylene Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 1 1 2 Wafer

Plast O Matic GYW Series Polypropylene Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 1 1 2 Wafer. For use with ultrapure liquids or chemicals compatible with acrylic. Full flow design; no corners to collect debris. No special hardware required for installation; completely assembled and pre-tested. O-ring seals are used on indicators allowing them to seal at extremely low pressures as well as high pressures. Flow indicators are full ported, eliminating any possible flow resistance. Designed to withstand reasonable external shocks. Flow indicators are designed to indicate the presence or clarity of high purity or corrosive liquid in a piping system. Standard O-ring seals are Viton. Two flange O-ring seals are supplied; therefore, other gasket materials are not required. They cannot be used with hydrofluoric acid or sodium hydroxide as they will etch the Pyrex cylinder wall. The transparent outer cylinder wall is high impact strength acrylic. Series GYW flow indicators utilize a double-wall construction and are used on flanged piping systems handling highly corrosive and ultra-pure liquids compatible with Pyrex glass. FKM seals are standard. An optional fluttering device is also offered. Double wall Pyrex and acrylic construction for maximum safety. The inner wall (wetted) is Pyrex. Standard fasteners are stainless steel. Large 360 degree viewing area. Natural polypropylene ends are standard and are also the least expensive. These indicators will fit 1-1 / 2", smooth face standard companion flanges as well as DIN (European standard) flanges.

SMC AS3002FS 10 Speed Controller Inline With Indicator Pack Of 2

SMC AS3002FS 10 Speed Controller Inline With Indicator Pack Of 2
SMC AS3002FS 10 Speed Controller Inline With Indicator Pack Of 2

SMC AS3002FS 10 Speed Controller Inline With Indicator Pack Of 2. Body Size: 300 (3 / 8 Standard). Indicator Direction: 0. flow control speed controller, inline, with indicator.

Dernord Sanitary Sight Glass 1 5 Tri Clamp With Stainless Steel 316 Cage Protection

Dernord Sanitary Sight Glass 1 5 Tri Clamp With Stainless Steel 316 Cage Protection
Dernord Sanitary Sight Glass 1 5 Tri Clamp With Stainless Steel 316 Cage Protection

Dernord Sanitary Sight Glass 1 5 Tri Clamp With Stainless Steel 316 Cage Protection. Max Pressure: 120 PSI, Max Temperature: 300 Fahrenheit. Full bore design, Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Moreover, with easily replaceable seals and glass these Dernord Sight Glasses will service you for years. From the Manufacturer This Dernord Sanitary In-line Sight Glasses are used widely in the food, dairy and beverage sanitary processes to view products and fluids. Can be used in vertical or horizontal position. Sanitary Straight Sight Glasses are constructed with SUS 304 housing, Tempered Glass and silicone seals. The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries. These In-line Sight Glasses are easier to clean. In-line Sight Glass with Clamp End, SUS 304 body material. Dernord Sanitary In-Line Sight Glass Features Max Pressure: 120 PSI Max Temperature: 300 Fahrenheit Tri-clamp size: 1.5 inch Body material: Stainless Steel 304 Glass: Tempered Glass. In-light Sight Glass Flow Pipe OD: 38 MM, Ferrule OD: 50.5 MM, Fits Tri-clamp: 1.5".

SMC AS1002FS 04 Speed Controller Inline With Indicator Pack Of 2

SMC AS1002FS 04 Speed Controller Inline With Indicator Pack Of 2
SMC AS1002FS 04 Speed Controller Inline With Indicator Pack Of 2

SMC AS1002FS 04 Speed Controller Inline With Indicator Pack Of 2. Body Size: 100 (M 5 Standard). Indicator Direction: 0. flow control speed controller, inline, with indicator.

1 1 4 Sight Glass Sanitary Stainless Steel 316 Bokywox In Line Sight Glass With Clamp End Flow Sanitary Sight Glass Tri Clamp

1 1 4 Sight Glass Sanitary Stainless Steel 316 Bokywox In Line Sight Glass With Clamp End Flow Sanitary Sight Glass Tri Clamp
1 1 4 Sight Glass Sanitary Stainless Steel 316 Bokywox In Line Sight Glass With Clamp End Flow Sanitary Sight Glass Tri Clamp

1 1 4 Sight Glass Sanitary Stainless Steel 316 Bokywox In Line Sight Glass With Clamp End Flow Sanitary Sight Glass Tri Clamp. Temperature: 300 Fahrenheit. The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries. Sight Glass Flow Indicators provides a full 360 degree to observe fluid flow in any direction. Body material: Stainless Steel 316. This Boky Wox Sanitary In-line Sight Glasses are used widely in the food, dairy and beverage sanitary processes to view products and fluids. Sanitary Straight Sight Glasses are constructed with SUS 304 housing, Tempered Glass and silicone seals. Moreover, with easily replaceable seals and glass these Boky Wox Sight Glasses will service you for years. Max Pressure: 120 PSI, Max. These In-line Sight Glasses are easier to clean. Bokywox Sanitary In-Line Sight Glass Features Max Pressure: 120 PSI Max Temperature: 300 Fahrenheit Tri-clamp size: 1 1 / 4 inch Body material: Stainless Steel 316 Glass: Tempered Glass. In-Line sight Glass Flow Pipe OD: 1 1 / 4", Fits Tri-clamp: 1 1 / 4".

Plast O Matic GY Series PVC Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 3 NPT Female

Plast O Matic GY Series PVC Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 3 NPT Female
Plast O Matic GY Series PVC Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 3 NPT Female

Plast O Matic GY Series PVC Sight Glass Flow Indicator Double Wall For Extremely Corrosive And Ultra Pure Liquids 3 NPT Female. All Plast-O-Matic flow and level indicators are easily installed in a piping system. Flow indicators are full ported, eliminating any possible flow resistance. Flow indicators are simply threaded into a piping system. The flow indicators may be installed either vertically or horizontally; however, the level indicators can only be installed vertically. Large 360 degree viewing area. They should only be connected to plastic fittings. Double wall Pyrex and acrylic construction for maximum safety. The inner wall (wetted) is Pyrex. O-ring seals are used on indicators allowing them to seal at extremely low pressures as well as high pressures. Standard fasteners are stainless steel. No special hardware required for installation; completely assembled and pre-tested. Series GY flow indicators utilize a double-wall construction and are used to indicate flow or clarity of highly corrosive or ultra-pure liquids compatible with Pyrex glass. For use with ultrapure liquids or chemicals compatible with acrylic. Designed to withstand reasonable external shocks. Full flow design; no corners to collect debris. Flow indicators are designed to indicate the presence or clarity of high purity or corrosive liquid in a piping system. FKM seals are standard. The transparent outer cylinder wall is high impact strength acrylic. They cannot be used with hydrofluoric acid or sodium hydroxide which will etch the Pyrex cylinder wall. Male threads should be wrapped with PTFE tape or other acceptable pipe sealant and only made hand-tight, followed by a one-quarter turn more using a strap wrench.

SMC AS2052FS 09 Speed Controller Inline With Indicator Pack Of 2

SMC AS2052FS 09 Speed Controller Inline With Indicator Pack Of 2
SMC AS2052FS 09 Speed Controller Inline With Indicator Pack Of 2

SMC AS2052FS 09 Speed Controller Inline With Indicator Pack Of 2. Body Size: 205 (1 / 4 Standard). Indicator Direction: 0. flow control speed controller, inline, with indicator.

SMC AS1002FS 07 Speed Controller Inline With Indicator Pack Of 2

SMC AS1002FS 07 Speed Controller Inline With Indicator Pack Of 2
SMC AS1002FS 07 Speed Controller Inline With Indicator Pack Of 2

SMC AS1002FS 07 Speed Controller Inline With Indicator Pack Of 2. Indicator Direction: 0. Body Size: 100 (M 5 Standard). flow control speed controller, inline, with indicator.

SMC AS3002FS 12 Speed Controller Inline With Indicator Pack Of 2

SMC AS3002FS 12 Speed Controller Inline With Indicator Pack Of 2
SMC AS3002FS 12 Speed Controller Inline With Indicator Pack Of 2

SMC AS3002FS 12 Speed Controller Inline With Indicator Pack Of 2. Indicator Direction: 0. Body Size: 300 (3 / 8 Standard). flow control speed controller, inline, with indicator.

Arrow Pneumatics F554AW 1 2 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 250 Psi

Arrow Pneumatics F554AW 1 2 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 250 Psi
Arrow Pneumatics F554AW 1 2 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 250 Psi

Arrow Pneumatics F554AW 1 2 Filter 01 Micron Metal Bowl Pop Up Indicator Operating Temperature Range 40 Degree F To 160 Degree F Max Pressure 250 Psi. black coated metal bowl with liquid level sight. Pop-up indicator indicates abnormal condition such as plugged element or excessive flow. In line or modular installation. Black coated aluminum housing. Critical protection requires changing element at regular intervals. 03 micron fiber element.

110V 25W PC Ionizing Air Blower Fan Ion Anti Static Ionic Fan Electrostatic Ion Electric Fan Static Elimination Ion Blower ESD Air Blower Fan

110V 25W PC Ionizing Air Blower Fan Ion Anti Static Ionic Fan Electrostatic Ion Electric Fan Static Elimination Ion Blower ESD Air Blower Fan
110V 25W PC Ionizing Air Blower Fan Ion Anti Static Ionic Fan Electrostatic Ion Electric Fan Static Elimination Ion Blower ESD Air Blower Fan

110V 25W PC Ionizing Air Blower Fan Ion Anti Static Ionic Fan Electrostatic Ion Electric Fan Static Elimination Ion Blower ESD Air Blower Fan. Test instrument ME 268 A static Tester. Ionization indicator lamp. Small, light weight and portable. Test data will differ depending on changes in temperature and humidity of the surrounding air. Ion Balance adjuster. Rapidly neutralizes static charges Variable speed fan with wide range of air flow. Electric shock protection. Inherently balanced ion output. Ionizing air blower is the latest Technology ionizing device design. With its new functions of electric shock protection and ion balance adjuster, it makes safer and easier for static elimination. 60% And in time: Distance 300 mm positive negative 0.9 s 0.8 s Residual voltage: positive and negative distance 300 mm? The improved design of removable plastic mask also facilitates the maintenance work. Ionizing Air Blower Fan Features Operating Voltage: 110 VAC / 60 Hz, 220 VAC / 50 Hz Maximum power: 25 W Ion balance: 0 /-5 V (instinct, without adjusting) Air Coverage: Diameter 30 cm x 150 cm Ozone: Operating temperature: 0-50 C Wind Speed: 250-500 FPM 30 cm (adjustable) Air Volume: 45 110 CFM Air output: 35-70 CFM Fan noise: 50-57 d B 60 cm The dissipation rate: from 1000 V to 100 V is less than 1.5 seconds (the maximum air volume (lonization) according to the ESDSTM 3.1-2000 standard) Display: bright - ions produced high voltage Warning: sensor measuring instrument internal damage Weight: 2.6 kg In Addition to Static Test Results Test conditions: Test voltage: 1 KV-100 V Ambient temperature: 22 C Humidity? 5 V Ion balance voltage and time in line with ESD standard static elimination, static elimination time from the test voltage 1000 v 100 v measured.

SMC AS2052FS 08 Speed Controller Inline With Indicator Pack Of 2

SMC AS2052FS 08 Speed Controller Inline With Indicator Pack Of 2
SMC AS2052FS 08 Speed Controller Inline With Indicator Pack Of 2

SMC AS2052FS 08 Speed Controller Inline With Indicator Pack Of 2. Body Size: 205 (1 / 4 Standard). Indicator Direction: 0. flow control speed controller, inline, with indicator.