21 Great Stroboscopes

12 May 2017

Shimpo ST 1000 ABS Plastic Stroboscope Tachometer With LED Flash Technology 60 40000 Rpm Range 0 05 FS Accuracy 7 7 Length X 2 9 Width X 1 5 Height

Shimpo ST 1000 ABS Plastic Stroboscope Tachometer With LED Flash Technology 60 40000 Rpm Range 0 05 FS Accuracy 7 7 Length X 2 9 Width X 1 5 Height
Shimpo ST 1000 ABS Plastic Stroboscope Tachometer With LED Flash Technology 60 40000 Rpm Range 0 05 FS Accuracy 7 7 Length X 2 9 Width X 1 5 Height

Shimpo ST 1000 ABS Plastic Stroboscope Tachometer With LED Flash Technology 60 40000 Rpm Range 0 05 FS Accuracy 7 7 Length X 2 9 Width X 1 5 Height. The ST-1000 is adjustable in either coarse or fine step flash-rate tuning. Utilizing this phenomenon of slowing or stopping the motion with the adjusted rate of the ST-1000's flashing light, machine parts and processes may be inspected for defects. Typical applications for using the ST-1000 is to inspect rotors, meshing gears, vibration diagnostic equipment, textile equipment, printing production lines, power tools, speaker acoustical analysis, fan balancing and many more. Easy operation control. Flash rate value increase and decrease button. The ergonomic, hand held device is made of sturdy ABS plastic and comes with batteries and protective carrying case. The stroboscope is capable of flashing the light in a synchronous frequency to the operating machinery, creating the illusion of viewing stopped or slowed images. Coarse / fine tuning button. Plus, the rotational speed of the machinery and systems may be recorded for further performance analysis. Flash rate storage button - 10 user defined flash rates for later retrieval. Power supply: 4 AA batteries. The LED technology extends operation due to the low energy requirement of the light diodes compared with xenon stroboscopes. The backlit feature can be switched off to save battery life if desired. Shimpo velocity analyzing and measuring device is ideal for rotational machine inspection. Measures 7.7-inches length by 2.9-inches width by 1.5-inches height. Measures 7.7-inches length by 2.9-inches width by 1.5-inches height.

SUNDELY 15W 90V 240V MP3 Voice Control LED RGB Flash Stage Light Stroboscope For Party Disco Dance Hall Nightclub Bar DJ KTV

SUNDELY 15W 90V 240V MP3 Voice Control LED RGB Flash Stage Light Stroboscope For Party Disco Dance Hall Nightclub Bar DJ KTV
SUNDELY 15W 90V 240V MP3 Voice Control LED RGB Flash Stage Light Stroboscope For Party Disco Dance Hall Nightclub Bar DJ KTV

SUNDELY 15W 90V 240V MP3 Voice Control LED RGB Flash Stage Light Stroboscope For Party Disco Dance Hall Nightclub Bar DJ KTV. Material: Plastic, Control Mode: Remote Control, Sound, MP 3, Strobe. Working Voltage: AC 90 V-240 V, 50-60 Hz, Power: 15 W. MP 3 Voice-control LED RGB Flash Stage Light Stroboscope. Product Features: High brightness, colorful and romantic lighting effect High quality warranty, safe and reliable Long working life, excellent stability Small and exquisite appearance Light Source: 12 pieces LED Suitable for family Party, KTV, DISCO, dance halls, nightclubs, bars, malls, weddings, Carla Technical Details: Working Voltage: AC 90 V-240 V, 50-60 Hz Power: 15 W Light Source: 12 pcs RGB Color: RGB Effect: Strobe, Color Change Function: Strobe Control Mode: Remote Control, Sound, MP 3, Strobe Product model number: Certification: CE Main Material: Plastic Weight: 0.7 KG Packing Size: 15 X 6 X 20 cm, 5.9", X 2.36", X 7.8", (1 piece in box). Packing Size: 15 X 6 X 20 cm, 5.9", X 2.36", X 7.8", (1 piece in box), Weight: 0.7 KG.

PK2X Pocket Strobe Stroboscope Flash Range 30 12 500 FPM Flash Brightness 1200 Lux Complete Kit

PK2X Pocket Strobe Stroboscope Flash Range 30 12 500 FPM Flash Brightness 1200 Lux Complete Kit
PK2X Pocket Strobe Stroboscope Flash Range 30 12 500 FPM Flash Brightness 1200 Lux Complete Kit

PK2X Pocket Strobe Stroboscope Flash Range 30 12 500 FPM Flash Brightness 1200 Lux Complete Kit. Bright XENON flash intensity (over 1200 Lux) with life of 200 million flashes, Accepts input from sensor for external flash triggering. It small size, lightweight design makes it perfect for use by field technicians or maintenance personnel. Features Internal rechargeable Lithium Ion battery uses latest smart-charge technology for longest possible life and 2-Hour run-time on a single charge Bright XENON flash intensity (over 120. Provided with a threaded insert on underside of strobe for mounting to articulating arm or other fixture, Universal (100 - 240 V AC) AC-Adapter / Charger can be used anywhere worldwide. Operates when being recharged or run continuously via AC-power, Resolution of 1 RPM over the entire range with highly accurate speed control and drift-free operation. The new PK 2 X offer significant improvements from the previous generation model PK 2 including the following (refer to table below), 50% improvement in flash brightness 100% improvement in battery run-time Doubles the choice of power by permitting operation during re-charge or continuous operation when connected to AC-power This new model continues to offer the highest reliability, refined by over 10-years of continuous design manufacturing improvements since the introduction of the original Pocket Strobe Model PK 1 was introduced in 1996. Internal rechargeable Lithium Ion battery uses latest smart-charge technology for longest possible life and 2-Hour run-time on a single charge, Battery run time of 2 hours on full charge. This stroboscopic effect is accomplished by matching the flash rate of the stroboscope with the repetitive rate (RPM) of motion of the target. The PK 2 X requires only one hand to operate, yet performance comparable to much larger and heavier pistol-grip type models. Portable, lightweight and rugged construction. It is ideal for industrial, laboratory, R D and academic environments. The PK 2 X is powered by a rechargeable internal battery or directly from an AC power source allowing for continuous use if necessary, or continued use when the battery charge is low. A slow motion effect is accomplished with a slight mismatch of the relative speeds. Strobe, Universal AC-Adapter / Charger and External Trigger Jack in Carrying Case with Traceable Calibration Certificate. Flash Range: 30 - 12, 500 RPM / FPM The PK 2 X hand-held Pocket Strobe is convenient and accurate device to perform RPM measurements on rotating or reciprocating parts or components as well as a proven means for inspection of moving parts / machinery by freezing or slowing down the action. Its small size and excellent performance provide superior convenience and value - at a reasonable price.

Monarch Nova Strobe BBX 115 230 Digital Portable Stroboscope Rechargeable 7 81 H X 9 L X 3 66 W

Monarch Nova Strobe BBX 115 230 Digital Portable Stroboscope Rechargeable 7 81 H X 9 L X 3 66 W
Monarch Nova Strobe BBX 115 230 Digital Portable Stroboscope Rechargeable 7 81 H X 9 L X 3 66 W

Monarch Nova Strobe BBX 115 230 Digital Portable Stroboscope Rechargeable 7 81 H X 9 L X 3 66 W. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001: 2008. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. The xenon flash tube has an auto-adjustable 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Multiply-by-2 (2 / 4 or 2 X) and divide-by-2 (1 / 2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. Stroboscopes use either xenon flash tubes or LED light sources. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. Xenon flash tube with 8 to 20 microsecond flash duration provides crisp images in brightly lit areas. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes. This enables the operator to evaluate machine performance without stopping the machine. The Monarch 6206-012 Nova-Strobe battery-powered digital stroboscope has a xenon flash tube, a 30 to 10, 000 flashes per minute (FPM) range, internal phase shifting, and continuous duty cycle. Internal Ni MH batteries with universal 115 / 230 V AC battery charger and continuous duty cycle provide continuous use over the life of the battery. Monarch BBX 115 / 230 Nova-Strobe Monarch BBX 115 / 230 V AC battery charger with interchangeable wall plugs (PSC-2 U) Instructions. The stroboscope has a flash rate range of 30 to 10, 000 FPM and a flash rate accuracy of 0.002% of setting or or - least significant digit / 0.01 for use in slow-to-medium speed applications. Internal phase shift allows the target to be jogged clockwise or counterclockwise in 5 degree increments. Internal phase shift functionality allows the operator to manually rotate the target location clockwise or counterclockwise in 5 degree increments. Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. Rubbermaid Commercial Brute LLDPE Round Container without Lid, 32-Gallon, Gray (FG 263200 GRAY). Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6", 0 to 150 mm Measuring Range, 0.0005", 0.01 mm Resolution, LCD. Brady M 21-750-499 16 Length, 0.75", Width, B-499 Nylon Cloth, Black On White Label for BMP 21, ID PAL, and LABPAL Printers. Rolodex Mesh Collection Single-Pocket Wall File, Black (21931). It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The built-in 1 / 4", 20 UNF (Unified Fine) thread mount and continuous duty cycle provides continuous use over the life of the battery without the need for cool-down periods. rate range 30 to 10, 000 FPM / RPMFlash rate accuracy 0.002% of setting or or - least significant digit / 0.01 FPMFlash duration 8 to 20 microseconds / 230 m Joules up to 3450 FPMFlashtube Xenon with 100-million flash life span Average Power 13 W above 3450 FPMDisplay 6-digit LCDDuty cycle Equal to the battery life Flash rate resolution 1 FPMPower supply Internal Ni MH rechargeable battery with universal 115 / 230 V recharger Dimensions Body: 3.66 x 3.56 x 9", 93 x 90 x 229 mm Reflector housing: 4.8", 122 mm diameter Handle: 4.35", 108 mm Weight 1.5 lb H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Battery-powered digital stroboscope with xenon flash tube and adjustable flash rate is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Flash rate range of 30 to 10, 000 flashes per minute (FPM) and built-in multiply-by-2 and divide-by-2 functionality provides still images and verification of speed measurement.

REED Instruments K4020 Digital Stroboscope 10 000 RPM

REED Instruments K4020 Digital Stroboscope 10 000 RPM
REED Instruments K4020 Digital Stroboscope 10 000 RPM

REED Instruments K4020 Digital Stroboscope 10 000 RPM. Simply aim the instrument at the rotational object and synchronize the strobe's flash rate (fpm) with object speed (rpm). Basic accuracy of 0.05%. Measuring Range: 100 - 10, 000 RPM. Tripod mount for stationary use. The K 4020 features flash rate speeds from 100 to 10, 000 rpm, a xenon light bulb and bright LED display.

Monarch Vibration Strobe Vbx Portable Stroboscope Kit For CSI Model 2120 Data Collector With NIST Certificate Of Calibration

Monarch Vibration Strobe Vbx Portable Stroboscope Kit For CSI Model 2120 Data Collector With NIST Certificate Of Calibration
Monarch Vibration Strobe Vbx Portable Stroboscope Kit For CSI Model 2120 Data Collector With NIST Certificate Of Calibration

Monarch Vibration Strobe Vbx Portable Stroboscope Kit For CSI Model 2120 Data Collector With NIST Certificate Of Calibration. Monarch 6220-031 vibration stroboscope PSC-pbx U 115 / 230 V AC universal power supply / recharger Spare lamp CSI 2120 data collector interface cable CA-4046-6 accelerometer cable NIST Certificate of Calibration Carrying case Instructions. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Stroboscopes use either xenon flash tubes or LED light sources. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. The stroboscope a 115 / 230 V AC universal power supply / battery charger, a CSI 2120 data-collector interface cable, an accelerometer cable, a NIST Certificate of Calibration, a spare xenon lamp, carrying case, and instructions. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 200, 000 rpm and an accuracy of or - 0.01% or 0.1 rpm. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and rate range 30 to 50, 000 FPM, 0.5 to 830 Hz Flash rate accuracy or - 0.002% of reading Flash duration 8 to 20 microseconds Flash rate resolution 0.01 to 1.0 FPM, selectable Virtual RPM 0 to 200 VRPMPhase delay 0.1 to 359.9 degrees Time delay 0.01 to 1000 milliseconds Tachometer mode 5 to 250, 000 RPMExternal input Input pulse, 0.5 microseconds minimum, TTL to 24 V maximum Trigger output / Remote sync 3.3 V TTL-compatible 40 microsecond pulse, Positive / Negative Power supply Internal rechargeable battery with AC power supply / recharger Weight 1.9 lbs. The stroboscope operates on internal rechargeable batteries or is line-powered using the universal 115 / 230 V AC power supply / recharger. Narrow and wide bandwidth filter selection discriminates fundamentals from harmonics providing more stable phase reading. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate transistor-transistor logic (TTL) input and output jacks transmit signals from the accelerometer cable to a remote CSI Model 2120 data collector (data collector not. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001: 2008. The phase shift range of 0.1 to 359.9 degrees and time delay range of 0.01 to 1000 milliseconds allow the operator to view the object at any point in the cycle without moving the trigger point. The stroboscope has a flash rate range of 30 to 50, 000 FPM / 0.5 to 830 Hz and an accuracy of or - 0.002% of reading. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Xenon flash tube with 30 to 50, 000 FPM / 0.5 to 830 Hz flash rate and 8 to 20 microsecond flash duration provides crisp images in brightly lit areas. Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. The narrow-bandwidth filter limits the influence of harmonics around the selected frequency, providing a more stable phase reading. A NIST Certificate of Calibration ensures accuracy. TTL input and output jacks can also be used to provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. The xenon flash tube has an 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. This enables the operator to evaluate machine performance without stopping the machine. Multiply-by-2 (2 / 4 or 2 X) and divide-by-2 (1 / 2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. 0.86 kg H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. The Monarch 6220-031 battery or line-powered, vbx portable vibration stroboscope has a xenon flash tube, provides measurements in flashes per minute (FPM) and hertz (Hz), and has output cables for use with the CSI Model 2120 data collector (not for use in applications requiring balancing, motion analysis, coupling inspections, and general-purpose phase-shifting. Separate 3.5 mm (1 / 8") transistor-transistor logic (TTL) input and output jacks transmit signals using the accelerometer cable and CSI data collector interface cable to a remote CSI Model 2120 data collector (data collector not. Battery or line-powered vibration stroboscope measures flashes per minute (FPM) and hertz (Hz), and analyzes vibration transducer signals for use in balancing, motion analysis, coupling inspections, and general-purpose phase-shifting applications.

Monarch Instrument 6203 010 Monarch Nova Strobe DAX Deluxe Digital Stroboscope 115 VAC

Monarch Instrument 6203 010 Monarch Nova Strobe DAX Deluxe Digital Stroboscope 115 VAC
Monarch Instrument 6203 010 Monarch Nova Strobe DAX Deluxe Digital Stroboscope 115 VAC

Monarch Instrument 6203 010 Monarch Nova Strobe DAX Deluxe Digital Stroboscope 115 VAC. Display Type: 6-digit numeric, 5-digit alphanumeric backlit LCD. Flash Accuracy (fpm), 0.002% of setting or 1 lsd. Phase shifting models let you use your stroboscopes continuously View different parts of moving machinery. Standard Digital Stroboscopes Stroboscopes feature an LCD readout of flashes per minute (fpm), x 2 and 2 capacity for distinguishing actual rpm from harmonic frequencies, a memory for six flash rates, a recall function for last flash rate, and an external input and trigger output for remote synchronous operation. Select standard or phase-shifting models according to your application. Flash Color: 6500 K white xenon. Battery Life: 2 hours typical at 1800 fpm. Flash Duration: 8 to 20 sec. What's a 6-ft (1.8-m) power cord (115 VAC models plug only) (115 / 230 models battery recharger), and an NIST-traceable calibration report supplied by the manufacturer. These stroboscopes feature a pistol-grip handle with a latching trigger and a 1 / 4-20 threaded bushing for extended hands-free tripod mounting. High flash energy allows measurements in bright areas.

Monarch Nova Strobe BBL LED Portable Stroboscope Rechargeable Battery 9 L X 3 66 W X 3 56 H Includes Carrying Case

Monarch Nova Strobe BBL LED Portable Stroboscope Rechargeable Battery 9 L X 3 66 W X 3 56 H Includes Carrying Case
Monarch Nova Strobe BBL LED Portable Stroboscope Rechargeable Battery 9 L X 3 66 W X 3 56 H Includes Carrying Case

Monarch Nova Strobe BBL LED Portable Stroboscope Rechargeable Battery 9 L X 3 66 W X 3 56 H Includes Carrying Case. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. Monarch 6230-011 BBL stroboscope Universal 115 / 230 V charger with interchangeable wall plugs Carrying case Instructions. This enables the operator to evaluate machine performance without stopping the machine. The flash rate range of 30 to 500, 000 FPM / RPM has an accuracy of 0.002% of setting or or - 1 least-significant digit / 0.01 FPM. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Integrated 1 / 4-20 UNF (Unified Fine) thread for mounting on a tripod. 30 to 500, 000 flashes / revolutions -per-minute (FPM / RPM) range and adjustable flash duration provides crisp images in high-speed applications. The 12-array LED light source has an adjustable flash duration up to 14 degrees or 3000 microseconds and a light output of 3000 lux. Multiply-by-2 (2 / 4 or 2 X) and divide-by-2 (1 / 2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. The stroboscope has a continuous duty cycle for the life of the battery. 860 g H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. The internal Ni MH rechargeable battery has a typical life-span of 8 to 10 hours at 1800 FPM and a universal 115 / 230 V AC recharger. Continuous duty cycle for the life of the battery (8 to 10 hours, typical). 12-array LED light source provides bright light output, long bulb life, and long battery life. Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001: 2008. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. Stroboscopes use either xenon flash tubes or LED light sources. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes. The Monarch 6230-011 BBL battery-operated stroboscope has a 12-array LED light source, a 30 to 500, 000 flashes / revolutions per minute (FPM / RPM) range, and a continuous duty cycle to provide stop-motion inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. An integrated 1 / 4", 20 UNF (Unified Fine) thread enables the stroboscope to be mounted on a tripod for long-term use. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and rate range 30 to 500, 000 FPM / RPMFlash rate accuracy 0.002% of setting or or - 1 least-significant digit / 0.01 FPMFlash duration Adjustable to 14 degrees / 3000 microseconds maximum Light source 12-array LEDLight output 3000 lux at 6000 FPM, 8 inches (20 cm), 2% duty cycle Color temperature 6300 degrees Kelvin Operating time 8 to 10 hours typical at 1800 FPMPower supply Internal Ni MH rechargeable battery with 115 / 230 V, 50 / 60 Hz recharger Dimensions Body: 3.66 x 3.56 x 9", 93 x 90 x 229 mm Reflector housing: 4.8", 122 mm diameter Handle: 4.254", 108 mm Weight 1.9 lbs. Battery-operated LED stroboscope provides stop-motion inspection and speed measurement and is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion.

Pyle PST30 Digital LED Non Contact Stroboscope Tachometer With Backlit LCD Display And 19999 RPM Range

Pyle PST30 Digital LED Non Contact Stroboscope Tachometer With Backlit LCD Display And 19999 RPM Range
Pyle PST30 Digital LED Non Contact Stroboscope Tachometer With Backlit LCD Display And 19999 RPM Range

Pyle PST30 Digital LED Non Contact Stroboscope Tachometer With Backlit LCD Display And 19999 RPM Range. Digital control to adjust flash frequency - accuracy: 0.05%. Low power consumption - Resolution: 1, 000 RPM: 0.1 RPM 1, 000 RPM: 1 RPM. Large lcd display with backlight - greater than or equal to 1, 000 Rpm: coarse adjust: 100 Rpm, fine adjust: 1 Rpm. The strobe rate can quickly be set anywhere within the full range while making fine adjustments is just as easy. Low power consumption - resolution: 1, 000 Rpm: 0.1 Rpm 1, 000 Rpm: 1 Rpm. Range: 60 19, 999 RPM - 7.68 in x 2.87 in x 1.5 in. Less than 1, 000 RPM: Coarse adjust: 10 RPM, Fine adjust: 0.1 RPM - Battery: 4 x 1.5 V AA battery. With the PST 30 you can analyze speed, motion and vibration on rotating shafts, fans or perform hi-speed motion analysis on speakers, ink-jet printing and more. It is fitted with 18 state of the art, super-bright leds. The PST 30 stroboscope tachometer by PYLE is built for maximum performance, portability and ease of use. Digital Photo Laser Tachometer Non Contact Tach RPM Meter. The PST 30 is a hand-held battery powered led digital stroboscope for use in speed measurement as well as motion analysis.

DT 2350PB Stroboscope Strobe Flash Meter Stroboscopic Tester 50 40 000 FPM

DT 2350PB Stroboscope Strobe Flash Meter Stroboscopic Tester 50 40 000 FPM
DT 2350PB Stroboscope Strobe Flash Meter Stroboscopic Tester 50 40 000 FPM

DT 2350PB Stroboscope Strobe Flash Meter Stroboscopic Tester 50 40 000 FPM. Internal / external triggering fast conversion; x 2 and 2 button for fast adjustment. We use DHL / Fedex / UPS. We use DHL and Fedex. Applications: The Stroboscope is capable to provide image of single, two or multiple stillness for the vibration object, rapidly rolling object or a periodic motion object, and can also use to observe the movement tracks. Use photoelectric signal while external triggering, achieve automatic tracking function of the pattern. Automatic stop flashing to save electricity and improve flash tube lifetime. features: Use microcomputer technology, emerging technologies, anti-jamming technique and other advanced technology, it can measure the rotative velocity without the object. Display: 5 Digits 10 mm LCD Measurement Range: B: 50 40, 000 FPM Accuracy: (0.05% n 1 d) Resolution: 0.1 FPM (50 999.9 FPM), 1 FPM (Over 1000 FPM) Sampling Time: 0.3 Seconds External Trigger Level: 3 24 V H / L Range: Flashing Light is much Brighter at Low Range than at High Range Flash Tube Life: 100 Million Times Regular Operating Conditions: No Corrosive Gas and Electromagnetic Fields Operating Conditions: Temperature: 0 40 Degree; Humidity: less than 85% RH Power Supply: AC 220 V (Optional AC 110 V) Power Consumption: About 50 W Dimensions: 215 x 85 x 180 mm Weight: About 1000 g 1 Main Unit 1 Carrying Case (B 08) 1 Operation Manual.

LS 9 LED WB LED Fixed Mount Linear Stroboscope Wide Body Housing Configuration Frequency Range 0 120000 FPM

LS 9 LED WB LED Fixed Mount Linear Stroboscope Wide Body Housing Configuration Frequency Range 0 120000 FPM
LS 9 LED WB LED Fixed Mount Linear Stroboscope Wide Body Housing Configuration Frequency Range 0 120000 FPM

LS 9 LED WB LED Fixed Mount Linear Stroboscope Wide Body Housing Configuration Frequency Range 0 120000 FPM. LEDs provide lifetime use and never require replacement. Uses 120 of the newest generation LEDs in a 15 x 8 array. Power Required: 24 VDC (/-10% 20 W DIN 41524 5-pin standard plug universal power supply optionally available (LS-5-AC-WORLD). Powered by 24 V DC (1.5 A peak). Light intensity / sharpness: adjustable with turning knob. 200 m A switchable trigger input. An optional universal AC-DC Power supply is offered as an option. External Trigger Input: 330 V / max. 5 m A Ppotential-free optocoupler DIN 41524 5-pin standard plug Uout Uin, max. Frequency Range: 0.120000 FPM (flashes per minute). Power can be connected in either of these 3 locations. Material: Aluminum. Illumination intensity single flash: ca. Adjustable brightness and image sharpness. Trigger Output: for connection to 2 nd Strobe (Slave). The LS-9-LED-WB LED Fixed-Mount Linear Stroboscope, Wide-Body Housing Configuration, Frequency Range: 0.120000 FPM is a new LS-9-LED is a high-performance stationary LED-stroboscope with powerful light output and uniform light distribution over a large area for use on web-widths up to 500 mm (20 inches) and wider. Illumination Intensity: 7500 Lux, max (30 cm area at 12", 3). 1 Mega-Lux / 30 cm / 12". Illumination area: 30 x 50 cm / 12 x 20 inches. Extremely bright and uniform light distribution over an area of 300 x 500 mm (12", x 20"). For web widths 500 mm (20"), Two (2) or more strobes can be connected in parallel.

Easylifeproduct AC Powered Handheld Digital Stroboscope Strobe 50 12000 FPM Flash Analyzer LCD

Easylifeproduct AC Powered Handheld Digital Stroboscope Strobe 50 12000 FPM Flash Analyzer LCD
Easylifeproduct AC Powered Handheld Digital Stroboscope Strobe 50 12000 FPM Flash Analyzer LCD

Easylifeproduct AC Powered Handheld Digital Stroboscope Strobe 50 12000 FPM Flash Analyzer LCD. P External or internal trigger allows unit to be automatically synchronize with equipment. P Flash timer control conserves flash tube life. Flash timer control conserves flash tube life. P Strobe Flash tube type: Xenon lamp P Strong flash light at low range and week flash light at high range to protect the flash tube. Observing the movement tracks and providing image of single stillness, double stillness or multiple stillness of the vibration object. Wide measuring range high resolution. 1000 g One Set P 1 x Stroboscope with cable and plug P 1 x Instruction booklet P 1 x Spare bulb for future replacement P Standard Factory. Features P Measuring the rotational speed and inspect the defect of the object surface P Observing the movement tracks and providing image of single stillness, double stillness or multiple stillness of the vibration object. P Wide measuring range high resolution. Measuring the rotational speed and inspect the defect of the object surface. P LCD display: 4 digits, 10 mm (0.4 inch) LCD P Parameters Measured: FPM (Flash per minute) P Range: 50 - 12, 000 FPM (Flash per minute) P Resolution: 0.1 FPM (50 - 999.9 FPM), 1 FPM (over 1000 FPM) P Accuracy: (0.05% n 1 d) P Sampling Time: 0.3 second P External trigger level: 3 - 24 V (see below) P Operating condition: 0 - 40 c XC, below 85% RH P AC Power supply: 220 240 V or 100 110 V (EU / US / AU / UK adapter plug) P Unit size: approx. 215 (L) x 85 (W) x 180 (D) mm (8.5 x 3.3 x 7.1 inch) P Unit weight: approx.

Shimpo DT 315A Digital Tachometer Stroboscope With Internal Battery LED Display 0 01 Percent Accuracy 40 0 35000Fpm Flashing Range 115V AC Charger

Shimpo DT 315A Digital Tachometer Stroboscope With Internal Battery LED Display 0 01 Percent Accuracy 40 0 35000Fpm Flashing Range 115V AC Charger
Shimpo DT 315A Digital Tachometer Stroboscope With Internal Battery LED Display 0 01 Percent Accuracy 40 0 35000Fpm Flashing Range 115V AC Charger

Shimpo DT 315A Digital Tachometer Stroboscope With Internal Battery LED Display 0 01 Percent Accuracy 40 0 35000Fpm Flashing Range 115V AC Charger. Extruded aluminum construction exceptional durability. Continuous duty cycle prevents downtime waiting for unit to cool. Internal battery supply allows 4 hours of continuous duty on 1 charge. Microprocessor-controlled assures stability in changing temperature environments. External trigger allows unit to be automatically synchronized with equipment. Powered by rechargeable batteries located inside its rugged aluminum housing, the DT-315 A also performs as an AC line-powered strobe when plugged into its standard AC adapter / charger unit. The microprocessor-controlled DT-315 A possesses the same great features of the DT-311 A with the added convenience of total portability via its own internal power supply with up to one hour of full time, high intensity flash rate. Synchronous output enables unit to drive other strobes. Manual flash controller knob permits easy / accurate adjustments to flash rate. Highly polished focused reflector eliminates blind viewing areas. Phase shift (in degrees of delay time) enables observer to focus on one particular area of rotating and / or reciprocating machinery. Continuous duty cycle eliminates need to shut down for cooling. Phase shift allows visual analysis of rotating / reciprocating objects. High polish and focused reflector eliminates blind viewing areas. External trigger unit is automatically synchronized with equipment. Aluminum construction provides exceptional durability. Fast recharge cycle minimizes downtime to only 2 hours. Flash timer control extends flash tube life. Repeatable accuracy (/- 0.01 percent of reading) provides reliable measurement results.

SSEYL Testo 476 Pocket Strobe Tm Hand Held Stroboscope

SSEYL Testo 476 Pocket Strobe Tm Hand Held Stroboscope
SSEYL Testo 476 Pocket Strobe Tm Hand Held Stroboscope

SSEYL Testo 476 Pocket Strobe Tm Hand Held Stroboscope. transport case, recharger with 4 country adapters and trigger signal connector Key Features: High setting accuracy and stability to dynamic setting dial High light intensity due to energy optimised switching electronics and powerful xenon flashlamp Memory function (last reading is when switched off) Powerful rechargeable battery pack for min. Testo 476, Pocket Strobe (tm) hand-held stroboscope incl. 2 hours continuous operation without mains connection over the whole frequency range Overview The testo 476 Pocket Strobe (tm) hand-held stroboscope measures and checks rotation and vibration movements. It facilitates the measurement of very small objects or in hard-to-access places.

Monarch Nova Strobe BAX 115 Digital Portable Stroboscope 7 81 H X 9 L X 3 66 W

Monarch Nova Strobe BAX 115 Digital Portable Stroboscope 7 81 H X 9 L X 3 66 W
Monarch Nova Strobe BAX 115 Digital Portable Stroboscope 7 81 H X 9 L X 3 66 W

Monarch Nova Strobe BAX 115 Digital Portable Stroboscope 7 81 H X 9 L X 3 66 W. Internal phase shift allows the operator to manually rotate the target location clockwise or counterclockwise in 5 degree increments. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes. Multiply-by-2 (2 / 4 or 2 X) and divide-by-2 (1 / 2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001: 2008. 115 V AC power and continuous duty cycle provide long-term use without overheating. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. Monarch Nova-Strobe BAX 115 digital stroboscope Instructions. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Internal phase shift functionality allows the operator to manually rotate the target location clockwise or counterclockwise in 5 degree increments. Stroboscopes use either xenon flash tubes or LED light sources. Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. The xenon flash tube has an auto-adjustable 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tube with 8 to 20 microsecond flash duration provides crisp images in brightly lit areas. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. The Monarch 6206-010 Nova-Strobe 115 V AC line-powered digital stroboscope has a xenon flash tube, a 30 to 10, 000 flashes per minute (FPM) range, internal phase shifting, and continuous duty cycle. This enables the operator to evaluate machine performance without stopping the machine. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. The stroboscope has a flash rate range of 30 to 10, 000 FPM and a flash rate accuracy of 0.002% of setting, or or - least significant digit / 0.01 for use in slow-to-medium speed applications. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The built-in 1 / 4", 20 UNF (Unified Fine) thread mount, continuous duty cycle, and 115 V AC power source provide long-term use in permanent installations without the need for cool-down periods. rate range 30 to 10, 000 FPM / RPMFlash rate accuracy 0.002% of setting or or - least significant digit / 0.01 FPMFlash duration 8 to 20 microseconds / 230 m Joules up to 3450 FPMFlashtube Xenon with 100-million flash life span Average Power 13 W above 3450 FPMDisplay 6-digit LCDDuty cycle Continuous Flash rate resolution 1 FPMPower supply 115 V AC, 50 to 400 Hz Dimensions Body: 3.66 x 3.56 x 9", 93 x 90 x 229 mm Reflector housing: 4.8", 122 mm diameter Handle: 4.25", 108 mm Weight 1.5 lb H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. 115 V AC digital stroboscope with xenon flash tube and adjustable flash rate is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. Flash rate range of 30 to 10, 000 flashes per minute (FPM) and built-in multiply-by-2 and divide-by-2 functionality provides still images and verification of speed measurement.

Monarch Palm Strobe Digital Portable Stroboscope With NIST Certificate Of Calibration Spare Battery Pack And Holster 3 04 H X 9 34 L

Monarch Palm Strobe Digital Portable Stroboscope With NIST Certificate Of Calibration Spare Battery Pack And Holster 3 04 H X 9 34 L
Monarch Palm Strobe Digital Portable Stroboscope With NIST Certificate Of Calibration Spare Battery Pack And Holster 3 04 H X 9 34 L

Monarch Palm Strobe Digital Portable Stroboscope With NIST Certificate Of Calibration Spare Battery Pack And Holster 3 04 H X 9 34 L. Monarch 6205-051 Palm Strobe XRechargeable Ni MH battery pack (2) PSC-2 U 115 / 230 V AC Recharger NIST Certificate of Calibration Holster Instructions. The company, founded in 1977 and headquartered in Amherst, NH, meets International Organization for Standardization (ISO) standard 9001: 2008. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. The stroboscope two Ni MH battery packs, a universal 115 / 230 V AC battery charger, a NIST Certificate of Calibration, a holster, and instructions. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. 0.55 kg, including battery H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. The xenon flash tube has a 10 to 30 microsecond flash duration for crisp image viewing. Stroboscopes use either xenon flash tubes or LED light sources. Internal trigger mode has a flash rate range of 100 to 12, 500 flashes per minute (FPM) with an accuracy of or - 0.5 FPM, or or - 0.01% of reading. Monarch Instrument manufactures devices such as tachometers, stroboscopes, data loggers, and leak detectors. External trigger mode has a flash rate range of 0 to 14, 000 FPM with an accuracy of or - 0.2 FPM. Internal trigger with a range of 100 to 12, 500 flashes per minute (FPM) and external trigger with a range of 0 to 14, 000 FPM. Joystick-style tuning provides one-handed operation and eight memory positions provide recall of user-defined frequencies. Xenon flash tube with 10 to 30 microsecond flash duration provides crisp images. The joystick-style button control provides one-handed operation Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. A NIST Certificate of Calibration ensures accuracy. This enables the operator to evaluate machine performance without stopping the machine. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 250, 000 rpm and an accuracy of or - 0.01% or 0.1 rpm. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. Multiply-by-2 (2 / 4 or 2 X) and divide-by-2 (1 / 2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. The Monarch 6205-051 Palm Strobe battery-powered digital, portable stroboscope has a xenon flash tube with a 10 to 30 microsecond flash duration, internal and external trigger modes, a tachometer mode and is designed for motion analysis, preventive maintenance, printing and textile inspection, and speed measurement of repetitive motion. Separate 2.5 mm (1 / 8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and flash rate range and accuracy 100 to 12, 500 FPM with or - 0.5 FPM or or - 0.01% of reading accuracy External flash rate units and accuracy 0 to 14, 000 FPM with or - 0.2 FPM accuracy Flash duration 10 to 30 microseconds Flash rate resolution 0.1 FPMTachometer range and accuracy 5 to 250, 000 RPM with or - 0.01% or 0.1 RPM accuracy Flashtube Xenon Light power 7.9 watts at 6000 FPM, 150 m Joules up to 3100 FPMOutput pulse 250 microsecond positive pulse, 5 V DC typical External input 0 to 5 V TTL-compatible (12 V max), 20 microsecond minimum pulse width, positive edge triggered Power supply Removable Ni MH rechargeable battery pack Dimensions 3.04 x 9.34", 77 x 237 mm (H x W) Weight 1.2 lbs. Battery-powered digital stroboscope with xenon flash tube and adjustable wide-range flash rate is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. 2.5 mm (1 / 8", phono) transistor-transistor logic-compatible (TTL) input and output for use with external sensors and utilization of tachometer mode.

Vktech Digital Photo Tach Motion And Surface Mar Stroboscope Tachometer Instrument

Vktech Digital Photo Tach Motion And Surface Mar Stroboscope Tachometer Instrument
Vktech Digital Photo Tach Motion And Surface Mar Stroboscope Tachometer Instrument

Vktech Digital Photo Tach Motion And Surface Mar Stroboscope Tachometer Instrument. Technical Parameter: Measuring range: 60 19, 999 RPM RPM: Round per minute Coarse Adjust knob / Fine Adjust knob: Less than 1000 RPM: Coarse Adjust Knob: 10 RPM Fine Adjust knob: 0.1 RPM More than 1000 RPM: Coarse Adjust Knob: 10 RPM Fine Adjust knob: 1 RPM Accuracy: 0.05% Resolution: Less than 1000 RPM: 0.1 RPM More than 1000 RPM: 1 RPM Time base: 10 MHz Display: 19, 999 Power: 4 1.5 AA. Backlight control switch. Measuring range: 60 19, 999 RPM. 100% and high quality This tachmeter is used the microcomputer technique, photo electrical technique and LCD for one instrument combine Photo Tach Motion and Surface Mar. LCD for one instrument combine Photo Tach Motion and Surface Mar. UM-3 battery (Not Consumption: not more than 60 m A Color: black Length: 21.00 cm Width: 7.50 cm Height: 4.30 cm Do not point the flashlight at eyes.

Shimpo DT 326 Stroboscope LED Display 60 To 120 000 FPM 1 To 2 000 Hz Range LED Light Source

Shimpo DT 326 Stroboscope LED Display 60 To 120 000 FPM 1 To 2 000 Hz Range LED Light Source
Shimpo DT 326 Stroboscope LED Display 60 To 120 000 FPM 1 To 2 000 Hz Range LED Light Source

Shimpo DT 326 Stroboscope LED Display 60 To 120 000 FPM 1 To 2 000 Hz Range LED Light Source. 0.55 kg H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. Stroboscopes use either xenon flash tubes or LED light sources. Shimpo DT-326 stroboscope Input / output connector AC adapter AA battery (4) Carrying case Instructions. LED light source with 100 to 1, 300 lux provides high light output, quiet operation, and low power consumption for improved battery life. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Phase shift and time delay allow the operator to view the object at any point in the cycle without moving the trigger point. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. 100-240 V AC line or battery-powered operation for long-term or portable operation (battery operation requires four AA batteries. Stroboscope with LED light source is designed for analysis of rotogravure printing, extruders, engraving, pulse and water jets, belt inspections, audio and speaker systems, fuel injectors, vibration and cutting blade timing and sharpness. The stroboscope an input / output connector, 100 / 240 V AC adapter, four AA batteries, a carrying case, and instructions. Synchronous output enables the stroboscope to drive other strobes for wider coverage. Stroboscopes evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. The internal trigger mode has a 60 to 120, 000 FPM / 1 to 2, 000 Hz range and an accuracy of or - 0.02% or or - 1 digit. This enables the operator to evaluate machine performance without stopping the machine. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain stroboscopes. The LED light source has a light output range of 100 to 1, 300 lux, quiet operation, and low power consumption for improved battery life. The stroboscope can be battery- or line-powered using the universal 100 / 240 V AC adapter. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Stroboscopes have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. Shimpo Instruments manufactures force, torque, and speed evaluation instruments. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. It is designed for predictive and preventive maintenance of rotogravure printing, extruders, engraving, pulse and water jets, belt inspections, audio and speaker systems, fuel injectors, vibration and cutting blade timing and sharpness. A phase shift of 0 to 359 degrees and a time delay of 0 to 999 milliseconds (msec) enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. The company, founded in 1974 and headquartered in Itasca, IL, meets International Organization for Standardization (ISO) standard 9001. Multiply-by-2 (2 / 4 or 2 X) and divide-by-2 (1 / 2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. The Shimpo DT-326 battery-powered stroboscope has an LED light source, phase shift and time delay, a continuous duty cycle, and measures flashes per minute (FPM) and hertz (Hz). Stroboscopes are used in a variety of settings including manufacturing, printing, education, and and Hz Flash range 60 to 120, 000 FPMFrequency range 1 to 2, 000 Hz Flash rate accuracy 0.02% or- 1 digit at 77 degrees F (25 degrees C) Phase shift 0 to 359 degrees Time delay 0 to 999 milliseconds Light source and illumination LED, 100 to 1, 300 lux Controls Multiply-by-2, divide-by-2, manual phase shift, and ratio Display Backlit 6-digit LCDPower requirements 100 V - 240 V AC 50 / 60 Hz or 4 AA batteries with 20 to 80 minute operation time Dimensions 2.76 x 2.36 x 8.66", 70 x 60 x 220 mm (H x W x D) Weight 1.1 lb. Measures flashes per minute (FPM) and hertz (Hz) for matching rotation speed, and measuring rotation speed and frequency.

T Zone TZ 444 Stroboscope Frequency Measurement Device

T Zone TZ 444 Stroboscope Frequency Measurement Device
T Zone TZ 444 Stroboscope Frequency Measurement Device

T Zone TZ 444 Stroboscope Frequency Measurement Device. ruggedness allows many years of use. Range: 50 5, 000 flashes per minute. small in size, light in weight, easy to carry, convenient to use and operate. T-Zone TZ-444 Stroboscope Frequency Measurement Device.

Fluke Fluke 820 2 LED Stroboscope

Fluke Fluke 820 2 LED Stroboscope
Fluke Fluke 820 2 LED Stroboscope

Fluke Fluke 820 2 LED Stroboscope. Rugged, durable design utilizes solid-state LEDs with no filaments, gases, hollow cavities, or glass- (one meter drop). High efficiency LED solid-state light source with uniform flash characteristics allow for higher flash rates-30-300, 000 FPM (flashes per minute). Fluke 820 LED Stroboscope. Fluke 323 True-RMS Clamp Meter. Fluke 62 MAX IR Thermometer, Non Contact, 20 to 932 Degree F Range. High intensity 7-LED array-4, 800 Lux at 6, 000 FPM / 30 cm.

Velleman MK147 VP Kit Dual White LED Stroboscope 40 Ma 2 2 X 1 3 X 1 6 Size

Velleman MK147 VP Kit Dual White LED Stroboscope 40 Ma 2 2 X 1 3 X 1 6 Size
Velleman MK147 VP Kit Dual White LED Stroboscope 40 Ma 2 2 X 1 3 X 1 6 Size

Velleman MK147 VP Kit Dual White LED Stroboscope 40 Ma 2 2 X 1 3 X 1 6 Size. Powerful flash effect. Power supply: 9 V battery. Velleman MK 147-VP Kit, Dual White LED Stroboscope, 40 Ma, 2 X 1.3", x 1.6", Size. Velleman MK 147-VP Kit, Dual White LED Stroboscope, 40 Ma, 2 X 1.3", x 1.6", Size.