Top 19 Bmt Tubes

10 Jul 2019

10 Bearing 686ZZ 6X13x5 Shielded Miniature Ball Bearings

10 Bearing 686ZZ 6X13x5 Shielded Miniature Ball Bearings
10 Bearing 686ZZ 6X13x5 Shielded Miniature Ball Bearings

10 Bearing 686ZZ 6X13x5 Shielded Miniature Ball Bearings. Dimensions: 6 mm x 13 mm x 5 mm / Metric. Item: Double Shielded Ball Bearings. Closures: 2 Metal Shields. 686 ZZ Ball Bearings 6 mmx 13 mmx 5 mm 10 Bearings 10 Bearings Wheel Ball Bearings for many applications, this is a popular size that could be used in many RC Cars and Trucks or any application that uses this size 6 mm x 13 mm x 5 mm, Bearings are made of Chrome Steel, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease. Item: Double Shielded Ball Bearings Type: Deep groove ball bearings Closures: 2 Metal Shields Lubrication: Self Lubricated (Grease) Dimensions: 6 mm x 13 mm x 5 mm / Metric ID (inner diameter) Bore: 6 mm OD (outer diameter), 13 mm Width / Height / thickness: 5 mm Size: 6 mm x 13 mm x 5 mm Quantity: 10 Bearings Dynamic load rating Cr: 1, 100 N Static load rating Cor: 440 N Limiting Speed: Grease Lubrication: 48000 RPM Packing: 10 bearings in One plastic tube KOYO: W 686 ZZ NSK: 686 ZZ NMB: L-1360 ZZ FIT: BMT GAS FITS: BMT AUSTIN FITS: BMT 931 4012 SA-AD FITS: BMT 931 AUSTIN QCFE FITS: OFNA PIRATE (1: 8) GAS FITS: OFNA PIRATE RS Equal: 686-2 Z 686-ZZ FITS: PICCO CARS RS 600 GAS (1: 10). Type: Deep groove ball bearings. Lubrication: Self Lubricated (Grease).

Pressure Gauge MNPT 1 4 Inch 30Hg 60 PSI Bottom Mount Stainless Steel SS304 Glacier Tanks

Pressure Gauge MNPT 1 4 Inch 30Hg 60 PSI Bottom Mount Stainless Steel SS304 Glacier Tanks
Pressure Gauge MNPT 1 4 Inch 30Hg 60 PSI Bottom Mount Stainless Steel SS304 Glacier Tanks

Pressure Gauge MNPT 1 4 Inch 30Hg 60 PSI Bottom Mount Stainless Steel SS304 Glacier Tanks. We recommend either a teflon tape or more permanent liquid to seal the gauge. The stainless steel case is filled with glycerine to protect the internals against vibration and pulsation. Connection Size (s), 1 / 4 in. Because gauge needle does not have a zero stop, a no-pressure reading can be /- 1-2 PSI. Gauges that have a /- 3-2-3% accuracy is categorized as ASME B 40.100 Grade B, meaning that the lower and upper 1 / 4 of the scale has 3% accuracy and the middle 1 / 2 is 2% accurate. Gauge zero will move up and down with the local atmospheric pressure, so if cap is left un-trimmed, zeroing may need to be done periodically. Stainless Steel: SS 304. Bottom mount vacuum / pressure gauges are often attached to monitor system or vessel pressure. Due to limitations, our system has a delay in updating other pack stock quantities. This prevents needle chatter and it is normal for a bubble to be in the fluid. Or you can snip the tip of the cap per the instruction on the sticker when it is permanently installed so it will maintain zero. Connection Type (s), MNPT. This cap can either be pushed to the side to break the seal temporarily and allow the gauge to take in air, or leak some glycerin to to zero. 30 hg - 60 PSI 304 Stainless Steel Casing 1", Male NPT Fitting Bottom Mount Glycerin filled casing 2.5", Face /- 3-2-3% Accuracy Installation Instructions To gauge to zero after equalize the pressure using the rubber glycerin cap. Gauge accuracy is maintained only in a temperature range of 0 to 140 F (-18 to 60 C), any measurement made outside of this range cannot be accurate and may lead to malfunction.

IKA WORKS INC 3703200 BMT 20 S Tube For Grinding With Stainless Steel Balls

IKA WORKS INC 3703200 BMT 20 S Tube For Grinding With Stainless Steel Balls
IKA WORKS INC 3703200 BMT 20 S Tube For Grinding With Stainless Steel Balls

IKA WORKS INC 3703200 BMT 20 S Tube For Grinding With Stainless Steel Balls. sampling during operation. additional media quantities may be added during operation. kaolin, gypsum, coloured pigments, tablets), cell maceration, processing of materials mixed with fluids. Components: Tube, stainless steel balls, cover, Application: Dry milling of dry and brittle samples (e.

IKA Ultra Turrax Tube Disperser Accessories BMT 20S Container With Stainless Steel Grinding Beads Pack Of 25

IKA Ultra Turrax Tube Disperser Accessories BMT 20S Container With Stainless Steel Grinding Beads Pack Of 25
IKA Ultra Turrax Tube Disperser Accessories BMT 20S Container With Stainless Steel Grinding Beads Pack Of 25

IKA Ultra Turrax Tube Disperser Accessories BMT 20S Container With Stainless Steel Grinding Beads Pack Of 25. ST-20 for simple stirring. BMT-20 G, 20 S with glass or stainless-steel balls for grinding. BMT-20 S Container with stainless-steel grinding beads, Pack of 25. Four varieties of plastic sample containers available; all supplied with caps. For use with Ultra Turrax Tube Dispenser.

IKA Works 3701700 BMT 50 S M Gamma Tube For Grinding With Stainless Steel Balls

IKA Works 3701700 BMT 50 S M Gamma Tube For Grinding With Stainless Steel Balls
IKA Works 3701700 BMT 50 S M Gamma Tube For Grinding With Stainless Steel Balls

IKA Works 3701700 BMT 50 S M Gamma Tube For Grinding With Stainless Steel Balls. germ free conservation of samples (tissue, blood, etc). sampling during operation. kaolin, gypsum, coloured pigments, tablets), cell maceration, processing of materials mixed with fluids Further suitable for: additional media quantities may be added during operation - sampling during operation - sample preperation under sterile conditions - germ free conservation of samples (tissue, blood, etc.) Packing unit: 10 pieces. sample preperation under sterile conditions. additional media quantities may be added during operation. Components: Tube, stainless steel balls, cover Volume: 15 - 50 ml Application: Dry milling of dry and brittle samples (e.

IKA 3701700 Borosilicate Glass BMT 50 S M Gamma Tube For Grinding With Balls Pack Of 10

IKA 3701700 Borosilicate Glass BMT 50 S M Gamma Tube For Grinding With Balls Pack Of 10
IKA 3701700 Borosilicate Glass BMT 50 S M Gamma Tube For Grinding With Balls Pack Of 10

IKA 3701700 Borosilicate Glass BMT 50 S M Gamma Tube For Grinding With Balls Pack Of 10. Components: tube, stainless steel balls, cover. Kaolin, gypsum, colored pigments, tablets), cell maceration, processing of materials mixed with fluids. Suitable for sample preparation under sterile conditions. Suitable for germ free conservation of samples. Suitable for sampling during operation. Used in dry milling of dry and brittle samples (E.

08FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 8 Top 1 Mm Rohs Compliant Yes Pack Of 100 08FMN BMT A TF LF SN

08FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 8 Top 1 Mm Rohs Compliant Yes Pack Of 100 08FMN BMT A TF LF SN
08FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 8 Top 1 Mm Rohs Compliant Yes Pack Of 100 08FMN BMT A TF LF SN

08FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 8 Top 1 Mm Rohs Compliant Yes Pack Of 100 08FMN BMT A TF LF SN. Pitch Spacing: 1 mm. Gender: Receptacle. of Rows: 1 Row Plating: Tin Plated Material: Phosphor Bronze FFC / FPC Thickness: 0.3 mm Product Information: Ro HS Compliant: Yes Ro HS Phthalates Compliant: To be SVHC: No SVHC (07-Jul-2017) Download Independent Distributor. Product Range: FMN Series. Pitch Spacing: 1 mm No.

18FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 18 Top 1 Mm Rohs Compliant Yes 18FMN BMT A TF LF SN Pack Of 20

18FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 18 Top 1 Mm Rohs Compliant Yes 18FMN BMT A TF LF SN Pack Of 20
18FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 18 Top 1 Mm Rohs Compliant Yes 18FMN BMT A TF LF SN Pack Of 20

18FMN BMT A TF LF SN FFC FPC Board Connector FMN Series Through Hole Receptacle 18 Top 1 Mm Rohs Compliant Yes 18FMN BMT A TF LF SN Pack Of 20. Gender: Receptacle. of Rows: 1 Row Plating: Tin Plated Material: Phosphor Bronze FFC / FPC Thickness: 0.3 mm Ro HS Compliant: Yes Ro HS Phthalates Compliant: To be SVHC: No SVHC (07-Jul-2017). Product Range: FMN Series. Pitch Spacing: 1 mm. Pitch Spacing: 1 mm No.

Ika Works 3703300 BMT 20 G Tube For Grinding

Ika Works 3703300 BMT 20 G Tube For Grinding
Ika Works 3703300 BMT 20 G Tube For Grinding

Ika Works 3703300 BMT 20 G Tube For Grinding. kaolin, gypsum, coloured pigments, tablets), cell maceration, processing of materials mixed with fluids. Further suitable for additional media quantities may be added during operation, sampling during operation Features: Components: Tube, stainless steel balls, cover Volume: 2 - 15 ml Application: Dry milling of dry and brittle samples (e.

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 2

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 2
QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 2

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 2. Material: Stainless Steel. Mel number: 19 / 25 / 32 / 38 mm. Connection: Flange. This often causes confusion, as people think the BSP size refers to the outside diameter of the male thread. BSP (British Standard Pipe) Thread Size Information BSP (British Standard Pipe) size was originally based on the inner diameter measured in inches of a steel tube for which the male thread was intended. Example: so if i want to fit a thread measuring 1", you would 3 / 4", BSP see the chart below BSP Male thread Out side Diamter Normal Size Inch mm 1 / 8 DN 6 0.38", 9.7 1 / 4 0.51", 13.2 3 / 8 DN 10 0.65", 16.7 1 / 2 DN 15 0.82", 21 3 / 4 DN 20 1.04", 26.5 1 DN 25 1.31", 33.2 1-1 / 4 DN 32 1.65", 41.9 1-1 / 2 DN 40 1.88", 47.8 2 DN 50 2.35", 59.6 2-1 / 2 DN 65 2.96", 75.2 3 DN 80 3.46", 87.9 4 DN 100 4.45", 113 Item specifics: Type: Tee Material: Copper Technics: Casting Shape: Equal Connection: Female Mel number: BMTHead ce: ROUNDThread size: 1 / 8 1 / 4 3 / 8 1 / 2 Pressure: 232 psi / 1.6 Bar / 16 mpa / 16 kg Material: Brass.

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 3 8

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 3 8
QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 3 8

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 3 8. This often causes confusion, as people think the BSP size refers to the outside diameter of the male thread. BSP (British Standard Pipe) Thread Size Information BSP (British Standard Pipe) size was originally based on the inner diameter measured in inches of a steel tube for which the male thread was intended. Example: so if i want to fit a thread measuring 1", you would 3 / 4", BSP see the chart below BSP Male thread Out side Diamter Normal Size Inch mm 1 / 8 DN 6 0.38", 9.7 1 / 4 0.51", 13.2 3 / 8 DN 10 0.65", 16.7 1 / 2 DN 15 0.82", 21 3 / 4 DN 20 1.04", 26.5 1 DN 25 1.31", 33.2 1-1 / 4 DN 32 1.65", 41.9 1-1 / 2 DN 40 1.88", 47.8 2 DN 50 2.35", 59.6 2-1 / 2 DN 65 2.96", 75.2 3 DN 80 3.46", 87.9 4 DN 100 4.45", 113 Item specifics: Type: Tee Material: Copper Technics: Casting Shape: Equal Connection: Female Mel number: BMTHead ce: ROUNDThread size: 1 / 8 1 / 4 3 / 8 1 / 2 Pressure: 232 psi / 1.6 Bar / 16 mpa / 16 kg Material: Brass.

IKA Works 3699800 BMT 50 G Tube For Grinding With Glass Balls

IKA Works 3699800 BMT 50 G Tube For Grinding With Glass Balls
IKA Works 3699800 BMT 50 G Tube For Grinding With Glass Balls

IKA Works 3699800 BMT 50 G Tube For Grinding With Glass Balls. kaolin, gypsum, coloured pigments, tablets), cell maceration, processing of materials mixed with fluids Packing unit: 10 pieces. Components: Tube, glass balls, cover Volume: 15 - 50 ml Application: Dry milling of dry and brittle samples (e.

IKA Works 3629700 BMT 50 S M Tube For Grinding With Stainless Steel Balls

IKA Works 3629700 BMT 50 S M Tube For Grinding With Stainless Steel Balls
IKA Works 3629700 BMT 50 S M Tube For Grinding With Stainless Steel Balls

IKA Works 3629700 BMT 50 S M Tube For Grinding With Stainless Steel Balls. kaolin, gypsum, coloured pigments, tablets), cell maceration, processing of materials mixed with fluids Further suitable for: additional media quantities may be added during operation - sampling during operation Packing unit: 10 pieces. additional media quantities may be added during operation. sampling during operation. Components: Tube, stainless steel balls, cover Volume: 15 - 50 ml Application: Dry milling of dry and brittle samples (e.

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 4

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 4
QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 4

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 4. Mel number: 19 / 25 / 32 / 38 mm. Material: Stainless Steel. Connection: Flange. This often causes confusion, as people think the BSP size refers to the outside diameter of the male thread. BSP (British Standard Pipe) Thread Size Information BSP (British Standard Pipe) size was originally based on the inner diameter measured in inches of a steel tube for which the male thread was intended. Example: so if i want to fit a thread measuring 1", you would 3 / 4", BSP see the chart below BSP Male thread Out side Diamter Normal Size Inch mm 1 / 8 DN 6 0.38", 9.7 1 / 4 0.51", 13.2 3 / 8 DN 10 0.65", 16.7 1 / 2 DN 15 0.82", 21 3 / 4 DN 20 1.04", 26.5 1 DN 25 1.31", 33.2 1-1 / 4 DN 32 1.65", 41.9 1-1 / 2 DN 40 1.88", 47.8 2 DN 50 2.35", 59.6 2-1 / 2 DN 65 2.96", 75.2 3 DN 80 3.46", 87.9 4 DN 100 4.45", 113 Item specifics: Type: Tee Material: Copper Technics: Casting Shape: Equal Connection: Female Mel number: BMTHead ce: ROUNDThread size: 1 / 8 1 / 4 3 / 8 1 / 2 Pressure: 232 psi / 1.6 Bar / 16 mpa / 16 kg Material: Brass.

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 8

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 8
QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 8

QUAROS Male T Inch BSP Tee Connection Brass Pipe Adapter Coupler Connector 232Psi BMT Thread 1 8. Mel number: 19 / 25 / 32 / 38 mm. Material: Stainless Steel. This often causes confusion, as people think the BSP size refers to the outside diameter of the male thread. Connection: Flange. BSP (British Standard Pipe) Thread Size Information BSP (British Standard Pipe) size was originally based on the inner diameter measured in inches of a steel tube for which the male thread was intended. Example: so if i want to fit a thread measuring 1", you would 3 / 4", BSP see the chart below BSP Male thread Out side Diamter Normal Size Inch mm 1 / 8 DN 6 0.38", 9.7 1 / 4 0.51", 13.2 3 / 8 DN 10 0.65", 16.7 1 / 2 DN 15 0.82", 21 3 / 4 DN 20 1.04", 26.5 1 DN 25 1.31", 33.2 1-1 / 4 DN 32 1.65", 41.9 1-1 / 2 DN 40 1.88", 47.8 2 DN 50 2.35", 59.6 2-1 / 2 DN 65 2.96", 75.2 3 DN 80 3.46", 87.9 4 DN 100 4.45", 113 Item specifics: Type: Tee Material: Copper Technics: Casting Shape: Equal Connection: Female Mel number: BMTHead ce: ROUNDThread size: 1 / 8 1 / 4 3 / 8 1 / 2 Pressure: 232 psi / 1.6 Bar / 16 mpa / 16 kg Material: Brass.

IKA 3629700 Borosilicate Glass BMT 50 S M Tube For Grinding With Balls Pack Of 10

IKA 3629700 Borosilicate Glass BMT 50 S M Tube For Grinding With Balls Pack Of 10
IKA 3629700 Borosilicate Glass BMT 50 S M Tube For Grinding With Balls Pack Of 10

IKA 3629700 Borosilicate Glass BMT 50 S M Tube For Grinding With Balls Pack Of 10. Suitable for sampling during operation. Kaolin, gypsum, colored pigments, tablets), cell maceration, processing of materials mixed with fluids. Additional media quantities may be added during operation. Components: tube, stainless steel balls, cover. Used in dry milling of dry and brittle samples (E.

IKA 3699700 Borosilicate Glass BMT 50 S Tube For Grinding With Balls Pack Of 10

IKA 3699700 Borosilicate Glass BMT 50 S Tube For Grinding With Balls Pack Of 10
IKA 3699700 Borosilicate Glass BMT 50 S Tube For Grinding With Balls Pack Of 10

IKA 3699700 Borosilicate Glass BMT 50 S Tube For Grinding With Balls Pack Of 10. Components: tube, stainless steel balls, cover. Kaolin, gypsum, colored pigments, tablets), cell maceration, processing of materials mixed with fluids. Used in dry milling of dry and brittle samples (E.

IKA Works 3629800 BMT 50 G M Tube For Grinding With Glass Balls

IKA Works 3629800 BMT 50 G M Tube For Grinding With Glass Balls
IKA Works 3629800 BMT 50 G M Tube For Grinding With Glass Balls

IKA Works 3629800 BMT 50 G M Tube For Grinding With Glass Balls. additional media quantities may be added during operation. kaolin, gypsum, coloured pigments, tablets), cell maceration, processing of materials mixed with fluids Further suitable for: additional media quantities may be added during operation - sampling during operation Packing unit: 10 pieces. sampling during operation. Components: Tube, glass balls, cover Volume: 15 - 50 ml Application: Dry milling of dry and brittle samples (e.

IKA 3629800 Borosilicate Glass BMT 50 G M Tube For Grinding With Glass Balls Pack Of 10

IKA 3629800 Borosilicate Glass BMT 50 G M Tube For Grinding With Glass Balls Pack Of 10
IKA 3629800 Borosilicate Glass BMT 50 G M Tube For Grinding With Glass Balls Pack Of 10

IKA 3629800 Borosilicate Glass BMT 50 G M Tube For Grinding With Glass Balls Pack Of 10. Suitable for sampling during operation. Kaolin, gypsum, colored pigments, tablets), cell maceration, processing of materials mixed with fluids. Used in dry milling of dry and brittle samples (E. Additional media quantities may be added during operation. Components: tube, glass balls, cover.