Top 19 Multimeters On Sale

15 Apr 2019

FLIR CM83 Power Clamp Meter 600A With VFD And Bluetooth

FLIR CM83 Power Clamp Meter 600A With VFD And Bluetooth
FLIR CM83 Power Clamp Meter 600A With VFD And Bluetooth

FLIR CM83 Power Clamp Meter 600A With VFD And Bluetooth. VFD Mode provides superior accuracy for working on VFD-controlled equipment. METERLi NK technology wirelessly integrates electrical readings on your infrared image with FLIR Thermal Cameras. Powerful Worklights no only assist with clamping but are bright enough to serve as a primary worklight. maximum 1% Continuity threshold: 30? including batteries. FLIR TA 55 AC Current Line Splitter. FLIR TA 11 Protective Case for FLIR CM 7 x and CM 8 x Series. FLIR CM 83 600 A True RMS AC / DC Power Clamp Meter with VFD Mode, Bluetooth and METERLi NK; Voltage and Current, Bright White LED Backlight, Analog Bargraph, Integrated Voltage Detector Key Features VFD mode provides superior accuracy for working on VFD-controlled equipment Advanced power efficiency and harmonics measurements for system level performance analysis Powerful worklights not only assist with clamping but are bright enough to serve as a primary worklight FLIR Tools Mobile connects the FLIR CM 83 to your compatible smartphone and tablet via Bluetooth METERLi NK technology wirelessly integrates electrical readings on your infrared image with METERLi NK-enabled FLIR thermal cameras 6 AAA batteries, user manual / CD, CAT IV silicone test leads and limited lifetime warranty AC / DC current: 600 A 2% AC / DC voltage: 1000.0 V 1% 0.7% Harmonics (1 st-25 th 5% Inrush: 600 ACA 3% (integration time 100 ms) Active power: 10-600 k W 3% (10 V, 5 A minimum) Diode test: 0.4-0.8 V 0.1 V Capacitance: 3.999 m F maximum 1.9% Resistance: 99.99 k? 1% Frequency: 20.00 Hz to 9.999 k Hz 0.5% Maximum voltage applied to any terminal: 1000 V DC or 1000 V AC RMS Measuring rate: 3 samples per second Jaw opening: 37 mm (1.45", 1000 MCM) Bluetooth range (maximum), 10 m (32) Category rating: CAT IV-600 V, CAT III-1000 V Power requirements: 6 x 1.5 V AAA alkaline batteries Operating altitude: 2000 m (6550) Pollution degree: 2 Environmental conditions: Indoor use Dimensions (Hx Wx L), 1.9", x 3.9", x 10.3", Weight: 1.29 lb. Advanced power efficiency and harmonics measuremenets for system level performance analysis. FLIR Tools Mobile connects the FLIR CM 83 to your compatible smartphone and table via Bluetooth.

Combo 8 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin 1 VC890D Multimeter

Combo 8 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin 1 VC890D Multimeter
Combo 8 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin 1 VC890D Multimeter

Combo 8 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin 1 VC890D Multimeter. Hantek 1008 C 1 set Hantek CC-65 current clamp 1 set Hantek CC-650 current clamp 2 pc PP-80 60 MHz BNC oscilloscope probe 1 pc HT 201 Attenuator 1 pc BNC to Multimeter adapter (for you to connect CC 65 / CC-650 easily to a multimeter) 1 pair back pin. 1 set Victor VC 890 D multimeter All packed into 1 box to minimize postage. Hantek 1008 C 1 Set CC-65 1 Set of CC 650 current clamp VC 890 D Multimeter. Accessories: 2 pc PP-80 1 pc Hantek 201 20: 1 attenuator 1 pc BNC 2 MM adapter 1 pair back pin. All packed in 1 into 1 box to save postage. Well known USB oscilloscope for Auto diagnostics. This is the combo 8 for you to jump into auto diagnostics right away. Tool Aid SG 23500 Back Probe Kit.

INA219 High Side DC Current Sensor Breakout 26V 3 2A Max

INA219 High Side DC Current Sensor Breakout 26V 3 2A Max
INA219 High Side DC Current Sensor Breakout 26V 3 2A Max

INA219 High Side DC Current Sensor Breakout 26V 3 2A Max. Great for tracking battery life or solar panels. Perfect for your solar or battery powered Arduino project. Power the sensor itself with 3 to 5 VDC and connect the two I 2 C pins up to your microcontroller. This can cause with circuits since electronics tend to not like it when the ground references change and move with varying current draw. Supported by Adafruit Arduino libraries! Then connect your target power supply to VIN and the load to ground to VIN-. Most current-measuring devices such as our current panel meter are only good for low side measuring. This chip is much smarter - it can handle high side current measuring, up to 26 VDC, even though it is powered with 3 or 5 It will also report back that high side voltage, which is great for tracking battery life or solar panels. GY-521 MPU-6050 MPU 6050 Module 3 Axis analog gyro sensors 3 Axis Accelerometer Module. Electronics-Salon 4 x Prototype Breakout PCB Shield Board Kit for Raspberry Pi 3 2 B A, Breadboard DIY. Adafruit Ultimate GPS Breakout - 66 channel w / 10 Hz updates ADA 746. Element 14 Raspberry Pi 3 B Motherboard. Soldering Tip Cleaner Solder Tip Cleaning Wire and Holder Soft Coiled Brass Tip Cleaner Kit with 5 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips, No Water Needed. 2 X 5 A Range Electrical Parts Current Sensor Module ACS 712. ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits. 4 PCS Breadboards Include 2 PCS 830 Point Solderless Prototype PCB 2 PCS 400 Point Solderless Prototype PCB Breadboard Kit for Arduino Proto Shield Distribution Connecting Blocks. Hi Letgo ADS 1115 16 Bit 16 Byte 4 Channel I 2 C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High precision ADC Converter Development Board for Arduino Raspberry Pi. Elegoo EL-CP-003 3 pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks. Instead of struggling with two multimeters, you can just use the handy INA 219 B chip on this breakout to both measure both the high side voltage and DC current draw over I 2 C with 1% precision. That means that unless you want to get a battery involved, you have to stick the measurement resistor between the target ground and true ground. A precision amplifier measures the voltage across the 0.1 ohm, 1% sense resistor. Since the amplifier maximum input difference is 320 m V this means it can measure up to 3.2 Amps. With the internal 12 bit ADC, the resolution at 3.2 A range is 0.8 m With the internal gain set at the minimum of div 8, the max current is 400 m A and the resolution is 0.1 m Advanced hackers can remove the 0.1 ohm current sense resistor and replace it with their own to change the range (say a 0.01 ohm to measure up 32 Amps with a resolution of 8 m A) We a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5 mm terminal plug so you can easily attach and detach your load. Measure high side voltage and DC current draw.

Fluke Networks MT 8200 49A Cable Tester

Fluke Networks MT 8200 49A Cable Tester
Fluke Networks MT 8200 49A Cable Tester

Fluke Networks MT 8200 49A Cable Tester. Remote identifier enables one-person testing. Tone generator for tracing installed cables hidden in walls, floors and ceilings. Cable tester for simple verification of wiremaps and identification of faults with LEDs. Easy-to-read fault display on cable tester. Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs. Micro Mapper Twisted Pair Cable Tester. Ratcheting Crimper, Modular Crimper Cutter Stripper for RJ 45, CAT 5 e, CAT 6, CAT 6 A Klein Tools VDV 226-011-SEN. Pass-Thru Modular Wire Crimper, All-in-One Tool Cuts, Strips, Crimps, Fast and Reliable Klein Tools VDV 226-110. Fluke Networks 26000900 Pro 3000 Tone Generator and Probe Kit. Fluke Networks Intelli Tone Pro 200 Toner and Probe Kit (MT-8200-60-KIT). Fluke Networks 26100900 Pro 3000 Probe. Fluke Networks D-Snip Cable Scissors. Fluke Networks 10051501 D 914 Impact Punch Down Tool with Ever Sharp 66 / 110 Plus Screwdriver Blade. Fluke Networks Electrical Contractor Telecom Kit II with Pro 3000 Analog Tone and Probe Kit and Case. Fluke Networks 11293000 Pro-Tool Kit IS 60 with Punch Down Tool. Fluke Networks 11212530 Modular Crimper.

Extech EX820 True RMS 1000A Clamp Meters With Infrared Thermometers

Extech EX820 True RMS 1000A Clamp Meters With Infrared Thermometers
Extech EX820 True RMS 1000A Clamp Meters With Infrared Thermometers

Extech EX820 True RMS 1000A Clamp Meters With Infrared Thermometers. Fluorescent lights, motor drives, computer power supplies, and other electronic systems can distort the AC waveform, making it hard for averaging meters to get an accurate read. Large LCD Screen and Ergonomic Body Readings on the EX 820 are easy to see on the large, 4, 000-count, backlit LCD display. True RMS uses a more advanced formula to compensate for this kind of distortion. True RMS Prevents Distortion from Electronic Devices It can be very difficult to make accurate current and voltage readings in industrial and commercial applications when electronic devices are present. Model 26834-26 is CAT IV 600 V rated. Warranty Information The EX 820 1000-Amp True RMS AC Clamp Meter with Infrared Thermometer is backedy by a manufacturer's one-year limited warranty on parts and labor What's in the Box Meter, test leads, Type K bead temperature probe, battery, carrying case, and owner manual. Multipurpose Meter in One Convenient Device The Extech EX 820 offers multiple functions so service technicians can carry one meter into the field instead of several. Item is a Class II laser product, 1 m W power output. AC / DC voltage, resistance, Type K thermometer, capacitance, and frequency functions. The convenient thermometer has no cables or probes to connect, break, or lose. True RMS voltage and current readings. Its ergonomically designed, double-molded housing is durable enough to stand up to constant use. Clamp meter, multimeter and infrared thermometer all in one! Just point and shoot, and you get the results in seconds. Locate hot spots and overheating equipment with built-in IR thermometer. Built-In, Infrared Thermometer Find hot spots quickly and safely, even when they're hidden, with the built-in infrared thermometer. Weighing less than 14 ounces, it offers a comfortable grip for one-handed operation. Compact and powerful, the EX 820 1000-Amp True RMS AC Clamp Meter with Infrared Thermometer provides the versatility of multiple meters in one convenient device. Additionally, there is autoranging with manual override. For added convenience, it also features an auto power-off to preserve your batteries. Features data hold, Min / Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Units ar CAT III, 600 V rated. This Extech also features min / max, data, and peak hold of current surges during motor startup and other transience that freezes data in the display. A large, backlit display allows for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation. Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. The EX 820 measures AC / DC voltage and current, resistance, diode, continuity, frequency, and capacitance. It also a built-in, infrared thermometer for detecting invisible hotspots, Type K bead wire temperature probe, and True RMS to ensure accurate measurements without distortion from electronic devices. 1000 A True RMS AC Clamp Meter with IR Thermometer At a Glance: Provides multiple, accurate electrical measurements Built-in, infrared thermometer detects invisible hot spots True RMS capability corrects for distortion from electronic devices Large LCD screen with backlit display for clear viewing Durable, ergonomic design for easy one-handed operation One-year limited warranty on parts and labor EX 820 clamp-on multimeter with built-in Infra Red Thermometer is ideal for industrial applications. The EX 820 will measure AC current, AC / DC voltage, frequency, resistance, capacitance, diode, and continuity. Its wide-opening, 1-7 / 10-inch circular jaw fits around conductors up to 750 MCM, or two 500 MCM. The thermometer has an eight-to-one distance to target ratio, allowing measurements in areas that are normally difficult or unsafe to reach. Type K Bead Wire Probe Measures Temperature The Type K bead wire probe allows you to take temperature readings inside air conditioners, refrigerators, motors, bearings, pumps, and many other devices that emit heat. Temperatures can be measured from -4 to 1, 400 degrees Fahrenheit (-20 to 760 degrees Celsius). It measures a slim 10-3 / 5 by 4-3 / 10 by 2 inches (H x W x D), and runs on one 9-volt batterys. Built-in IR thermometer measures surface temperature from -58 to 518 F (-50 to 270 C). Measures AC current up to 1000 A with maximum resolution of 0.1 A.

XANAD Case Compatible For Fluke 117 Electricians True RMS Multimeter

XANAD Case Compatible For Fluke 117 Electricians True RMS Multimeter
XANAD Case Compatible For Fluke 117 Electricians True RMS Multimeter

XANAD Case Compatible For Fluke 117 Electricians True RMS Multimeter. CONVENIENT DESIGN: Smooth but strong 360 degree double zipper for easy opening and closing; Comes with comfortable hand strap to carry easily. PERFECT FIT: XANAD Storage Hard Carrying Organizer Travel Case Bag Tailor made for Fluke 117 Electricians True RMS Multimeter. 100% SAFE: XANAD Case is semi-waterproof, shockproof to protect your Fluke 117 Electricians True RMS Multimeter. XANAD Case has the following features: We have specifically designed this case for Fluke 117 Electricians True RMS Multimeter, so it fits perfect; EVA Hard external material is shockproof and semi- waterproof to protect your Fluke 117 Electricians True RMS Multimeter from impacts and splashes; Inner design build-in super quality gray velvet which is an excellent buffer for your Fluke 117 Electricians True RMS Multimeter; 360 degree zipper is convenient for you to put your Fluke 117 Electricians True RMS Multimeter in and out the case; Hand strap makes transportation easy and convenient, so you can take it easily; In a word, you deserve to own this case and it's also a great gift for your family and friends if they have Fluke 117 Electricians True RMS Multimeter. MATERIALS and DIMENSIONS: Internal material: GRAY VELVET; External material: EVA; External Dimensions: 10 6 2.8 inch, Weight: 317 g.

Extech MA3110 Cat IV True RMS 3000A AC Flexible Clamp Meter

Extech MA3110 Cat IV True RMS 3000A AC Flexible Clamp Meter
Extech MA3110 Cat IV True RMS 3000A AC Flexible Clamp Meter

Extech MA3110 Cat IV True RMS 3000A AC Flexible Clamp Meter. 8 mm Cable diameter fits into tight spaces and around large conductors. True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms. Autoranging AC current. 6000 Count LCD display. Data hold freezes reading on display. The thin 8 mm cable diameter easily fits into tight spaces. The MA 3110 is a CAT IV true RMS 3000 A AC flexible clamp meter. The flexible 11", (28 cm) clamp jaw easily wraps around bus bars and cable bundles that may be difficult to access with regular clamp Meters. True RMS and CAT IV rated allows for maximum accuracy and safety for your measurements.

Extech 480172 AC Line Splitter

Extech 480172 AC Line Splitter
Extech 480172 AC Line Splitter

Extech 480172 AC Line Splitter. Also features voltage check function. Plugging the power connector into the line splitter separates the hot / live conductor from the neutral (and ground). Meterk 9 in 1 Electronic Test Leads Kit, Digital Multimeter Leads with Alligator Clips, Test Extension, Test Probe, Plunger Mini-hooks Replaceable Test Meter. Aenllosi Hard Case for Fits Etekcity MSR-C 600 / Astro AI / Uni-T UT 202 A Auto-Ranging Multimeters AC / DC voltmeter Ammeter. Uni-T B 4 Q 094 UT 210 E True RMS AC / DC Current Mini Clamp M W Capacitance Tester. Extech MA 445 True RMS 400 A AC / DC Clamp Meter with NCV. Rare Earth Magnetic Hanger Klein Tools 69417. Sperry Instruments GFI 6302 GFCI Outlet / Receptacle Tester, Standard 120 V AC Outlets, 7 Visual Indication / Wiring Legend, Home Professional Use, Yellow Black. Mastech MS 2115 A True RMS DIGITAL DC / AC CLAMP METERS Multimeter Amp Voltage R HZ. P 3 P 4400 Kill A Watt Electricity Usage Monitor. Digital Clamp Meter AC / DC Auto-Ranging 600 Amp Measures Voltage, Resistance, Temp, More Klein Tools CL 800. Etekcity Digital Multimeter, MSR-C 600 Auto-Ranging Clamp Meter. Extech 480172 AC Line Splitter, Provides Easy and Safe Measurements of Current without the Need to Cut Off the Plug and Separate the Conductors, Voltage Check Function This Extech 480172 Line Splitter provides a fast and easy way to open standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors. When connected between a 120 Volt AC outlet and a device under test, this splitter separates the hot / live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter. Key Features Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors Plugging the power connector into the Line Splitter separates the hot / live conductor from the neutral (and ground) Voltage check function Two clamp positions: x 1 for direct readings, x 10 for actual reading multiplied by 10 Dimensions: 5.25", x 2", x 1", (133 x 51 x 25 mm) Weight: 5.8 oz (164.4 g). Allows clamp meter to measure AC current on a 2-wire or 3-wire power cord. Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors.

Amprobe ACD 53NAV 1000A AC Power Quality Clamp Meter

Amprobe ACD 53NAV 1000A AC Power Quality Clamp Meter
Amprobe ACD 53NAV 1000A AC Power Quality Clamp Meter

Amprobe ACD 53NAV 1000A AC Power Quality Clamp Meter. For example, power factor 1 indicates 100% electrical efficiency. AC / DC Voltage and Capacitance? The unit automatically turns off after 15 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. What is Power Factor? The hold function keeps the reading on the display for later viewing. It is the ideal tool for maintenance and installation of transformers and advanced equipment. Wide-Range of Applications The ACD-53 NAV s full set of features simplify day to day voltage, current, resistance and continuity applications. The ACD-53 NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. An audible continuity function quickly checks for good electrical connection and a diode test detects whether a circuit s diodes are working properly. ACD-53 NAV Digital Clamp Meter - (1) Test lead set - (1) 9 V battery (installed)- Soft vinyl carrying case - User s manual Compare Products ACD-50 NAVView larger 600 ACACD-51 NAVView larger HVACACDC-52 NAVView larger 600 A AC / DCACD-53 NAVView larger 1000 A ACACDC-54 NAVView larger 1000 A AC / DCAC Current? From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. To correct power factor, current and voltage need to be realigned using either capacitors or resolving harmonics issues. Low-Pass Filter and TRMS? Low pass filter for variable frequency drives. The rugged ACD-52 NAV has an impact- and wear-resistant molded rubber body that can withstand drops up to 4 feet. Power factor and active power readings provide data on the power usage and efficiency of electrical systems. Phase rotation indication. View larger Advanced Features for Complete Troubleshooting of Electrical Systems The ACD-53 NAV Navigator TM Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. Harmonics: THD, Individual 1-25? Check power quality to quickly determine the efficiency of an electrical system. Phase Rotation Indication? The total harmonic distortion reading (0 to 100% identifies whether you have a harmonics issue - the higher the THD percentage, the higher the risk of. Temperature (-50 F to 1832 F)? It is also UL listed and CE certified. Power Factor indicates electrical power efficiency from 0 to 1 by measuring real and reactive power. Built for rugged industrial environments, this CAT IV 600 V / CAT III 1000 V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks. 5 indicates only 50% electrical efficiency, meaning 50% of power is lost and power factor correction must be performed. Voltage up to 1000 V AC / DC, AC Current up to 1000 A, resistance, frequency, THD (total harmonics distortion) and individual harmonics from 1 to 25, power (k W), power factor. Harmful harmonics cause electrical system malfunctions including overheating, excessive neutral current and electrical equipment failure. Test performance such as verifying system efficiency and quickly troubleshooting issues to minimize costly downtime by performing load studies and motor testing system checks in performance. The ACD-53 NAV is CAT IV 600 V and CAT III 1000 V rated. The unique Navigator TM joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Full Range of Advanced Features The ACD-53 NAV measures AC current up to 1000 A, AC / DC voltage to 1, 000 V, capacitance, resistance, and frequency. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). This meter measures total harmonic distortion (THD) and individual harmonics up to the 25 th harmonic. Its jaws can accommodate an electrical conductor up to 1.60", (40 mm) in diameter. Troubleshoot motors with the capacitance function for startup and run capacitors, in-rush current analysis, low-pass filter for variable frequency drives (VFDs) and phase rotation to measure three-phase systems. Check power quality to quickly determine the efficiency of an electrical system by measuring power factor and working power measurements and test for harmful harmonics while you perform daily system checks. Product Features True-rms Voltage up to 1000 V AC / DC, AC Current up to 1000 A, resistance, frequency, THD (total harmonics distortion) and individual harmonics from 1 to 25, power (k W), power factor Low pass filter for variable frequency drives Phase rotation indication voltage detection Continuity beeper Min, max, peak and smart data hold Automatic flash light when clamp is open Large display with active backlight and analog bar graph Auto power off Maximum jaw opening 1.60", (40 mm) Drop proof to 4 feet CAT IV 600 V, CAT III 1000 V What s In the Box?

Cartridge For 4PC78

Cartridge For 4PC78
Cartridge For 4PC78

Cartridge For 4PC78. Model Number: 0011-F 4 Item: Replacement Cartridge Country of Origin (subject to change), United States. Price For: Each Type: Circulator Pump For Use With Grainger Item Number: 4 PC 78 For Use With Mfr. Replacement Cartridge, For Use With Grainger Item Number G 0370036, For Use With Mfr. Taco 007-042 RP Cast Iron Replacement Cartridge.

Amprobe DM 5 Power Quality Analyzer

Amprobe DM 5 Power Quality Analyzer
Amprobe DM 5 Power Quality Analyzer

Amprobe DM 5 Power Quality Analyzer. Real-time remote monitoring on compatible PC and Android devices via Bluetooth communication. Test parameters: voltage, current, active / reactive / apparent power, PF and frequency all on one screen. Power quality events: Swell, Dip, Interruption, transients, Inrush current, and flicker. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust. Full Analysis with Software: Multiple data visualization options allow you to quickly visualize your recorded data to identify potential issues. Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential / commercial electricians, HVAC / R technicians, utilities and industrial maintenance professionals. Quick Setup with On-Screen Guide: A step-by-step setup guide helps ensure you capture the right measurements.

20A Probe Test Lead Alligator Clips Agilent Fluke Ideal Clamp Cable Multimeter

20A Probe Test Lead Alligator Clips Agilent Fluke Ideal Clamp Cable Multimeter
20A Probe Test Lead Alligator Clips Agilent Fluke Ideal Clamp Cable Multimeter

20A Probe Test Lead Alligator Clips Agilent Fluke Ideal Clamp Cable Multimeter. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. Super Pointed Thin and High Precision. Universal to All Digital Multimeter. Material: PVC wire Can plug to Multimeter, Probes is very for sharp, very suitable for IC pins, LED and small components. Fluke 117 / 323 KIT Multimeter and Clamp Meter Combo Kit. Fluke 323 True-RMS Clamp Meter. Current: 20 A Cable length: 110 cm Low temperature conditions: 0 degree 40 degree Used for: All Digital Multimeter Color: Red and black 1 x Probe Test Lead with Agilent clips Due to the hand measurement, there have size about 1-2 cm. Cable length: 110 cm Low temperature conditions: 0 degree 40 degree Used for: All Digital Multimeter Color: Red and black.

Extech MN26T Autoranging Multimeter

Extech MN26T Autoranging Multimeter
Extech MN26T Autoranging Multimeter

Extech MN26T Autoranging Multimeter. Temperature, capacitance and frequency functions. Cat ll - 600 V, CE and UL listed. Autoranging compact multimeter that is ideal for the tool box or workbench. Extech Instruments Multimeter, Mini Tec, Autoranging w / Temp Probe, MN 26 T. Arduino Starter Kit - English Official Kit With 170 Page Book - K 000007. Practical Electronics for Inventors, Fourth Edition. Make: More Electronics: Journey Deep Into the World of Logic Chips, Amplifiers, Sensors, and Randomicity. Make: Electronics: Learning Through Discovery. Encyclopedia of Electronic Components Volume 1: Resistors, Capacitors, Inductors, Switches, Encoders, Relays, Transistors. Elenco Solid Hook-Up Wire Kit 6 Colors in a dispenser box WK-106. Red Devil Available 3332 Steel Wool Multi-Grade Pack. Extech TL 809 Electronic Test Lead Kit. FICBOX 400 tie points Solderless Breadboard (6 Pack). Thermaltronics TMT-TC-2 Lead Free Tip Tinner (20 g) in 0.8 oz Container. Measures AC and DC voltage to 600 V, AC and DC current to 10 A and resistance to 40 M.

XANAD Case Compatible For Fluke 87 V True RMS Multimeter

XANAD Case Compatible For Fluke 87 V True RMS Multimeter
XANAD Case Compatible For Fluke 87 V True RMS Multimeter

XANAD Case Compatible For Fluke 87 V True RMS Multimeter. PERFECT FIT: XANAD Storage Hard Carrying Organizer Travel Case Bag Tailor made for Fluke 87 V True RMS Multimeter. CONVENIENT DESIGN: Smooth but strong 360 degree double zipper for easy opening and closing; Comes with comfortable hand strap to carry easily. 100% SAFE: XANAD Case is semi-waterproof, shockproof to protect your Fluke 87 V True RMS Multimeter. Fluke 1 AC-A 1-II Volt Alert Non-Contact Voltage Tester. Fluke 87-V Digital Multimeter. XANAD Case has the following features: We have specifically designed this case for Fluke 87 V True RMS Multimeter, so it fits perfect; EVA Hard external material is shockproof and semi- waterproof to protect your Fluke 87 V True RMS Multimeter from impacts and splashes; Inner design build-in super quality gray velvet which is an excellent buffer for your Fluke 87 V True RMS Multimeter; 360 degree zipper is convenient for you to put your Fluke 87 V True RMS Multimeter in and out the case; Hand strap makes transportation easy and convenient, so you can take it easily; In a word, you deserve to own this case and it's also a great gift for your family and friends if they have Fluke 87 V True RMS Multimeter. MATERIALS and DIMENSIONS: Internal material: GRAY VELVET; External material: EVA; External Dimensions: 10 6 2.8 inch, Weight: 317 g.

Analog Multimeter 1000V 10A 20M Ohms

Analog Multimeter 1000V 10A 20M Ohms
Analog Multimeter 1000V 10A 20M Ohms

Analog Multimeter 1000V 10A 20M Ohms. DC Volts: 1000 Max. DC Volts 1000, Max. Ohms 20 megohm, Decibels -20 to 50 d B, Audible Continuity Yes, Mirrored Scale Yes, Overload Protector Manual Reset, Accuracy VDC /-2 Percent Full Scale, VAC /-3 Percent Full Scale, AC Frequency Response 100 KHz, Sensitivity 5 K Ohms / VAC, 20 K Ohms / VDC, Special Features Relay Protected, Battery Type 9 V and D, Test Leads, Batteries and Instructions. DC Amps: 10 A Battery Type: 9 V and D Sensitivity: 5 K Ohms / VAC, 20 K Ohms / VDC. AC Volts: 1000 Max. Audible Continuity: Yes Battery Type: 9 V and D Test Leads, Batteries and Instructions Overload Protector: Manual Reset Special Features: Relay Protected Country of Origin (subject to change), United States. Ohms: 20 megohm Item: Analog Multimeter Decibels: 20 to 50 d B Max. Price For: Each Test Leads, Batteries and Instructions Accuracy: VDC /-2% Full Scale, VAC /-3% Full Scale Mirrored Scale: Yes AC Frequency Response: 100 KHz Max. AC Volts 1000, Max. Analog Multimeter, Max.

BMT Combo 7 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin

BMT Combo 7 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin
BMT Combo 7 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin

BMT Combo 7 Of Hantek New 1008C Auto USB Oscilloscope 2 Pcs PP80 Probe 1 Set CC650 1 Set CC65 Current Clamp 1Pcs HT201 Attenuator 1 Pc Bnctodmm Adapter 1 Pair Back Pin. All packed into 1 box to minimize postage. Hantek 1008 C 1 Set CC-65 1 Set of CC 650 current clamp. Accessories: 2 pc PP-80 1 pc Hantek 201 20: 1 attenuator 1 pc BNC 2 MM adapter 1 pair back pin. Well known USB oscilloscope for Auto diagnostics. Hantek 1008 C 1 set Hantek CC-65 current clamp 1 set Hantek CC-650 current clamp 2 pc PP-80 60 MHz BNC oscilloscope probe 1 pc HT 201 Attenuator 1 pc BNC to Multimeter adapter (for you to connect CC 65 easily to a multimeter) 1 pair back pin. This is the combo 7 for you to jump into auto diagnostics right away. ESI 307 M Fuse Buddy Mini Current Loop. ESI 308 B Fuse Buddy ATC Current Loop. Lisle 45100 Brake Spring Tool.

FLIR E75 24 Advanced Thermal Imaging Camera With 320 X 240 IR Resolution And 24 Degree Lens

FLIR E75 24 Advanced Thermal Imaging Camera With 320 X 240 IR Resolution And 24 Degree Lens
FLIR E75 24 Advanced Thermal Imaging Camera With 320 X 240 IR Resolution And 24 Degree Lens

FLIR E75 24 Advanced Thermal Imaging Camera With 320 X 240 IR Resolution And 24 Degree Lens. Using FLIR s patented MSX Technology, the FLIR E 75 extracts visual details from the built-in digital camera and overlays them on top of the 320 x 240 pixel thermal image to create a high-resolution radiometric image in real-time. Layered infrared (IR) and digital images give you exceptional insight into the unknown and unseen, all without teardowns, shutdowns or other disturbances. The FLIR E 75 has a thermal range of -4 to 1200 Degrees Fahrenheit, which allows you to spot even the subtlest temperature patterns and details. 76, 800 Pixel (320 x 240) true native IR resolution, with patented FLIR MSX enhancements and Ultra Max TM super-resolution option. Item is a Class II laser product, 1 m W power output. Uploads images to FLIR Tools app via Wi-Fi; offers METERLi NK connectivity to FLIR multimeters, clamps, and moisture meters. The FLIR E 75 provides a safe, non-invasive and effective method for finding and diagnosing potential electrical, mechanical and industrial. Use FLIR's Wi-Fi App to connect your E 75 camera to any smartphone or tablet to import your radiometric JPEGs, stream video to co-workers and create reports, add and edit text and voice comments and so much more. Featuring Laser pointer, 4 X Continuous zoom, Image annotation (voice), Centerspot, Hot Spot, Cold Spot, Color Alarm and Auto-Max / Min Marker Measurements. This Advanced Thermal Camera comes with two Lithium Ion rechargeable batteries, battery charger, hand strap, hard transport case, IR lens, 8 GB SD Card, USB cables and adaptor, wrist strap and User manual. Rapid-response, laser assisted autofocus; vibrant 4", touchscreen (400 cd / m 2 surface brightness) with 160 viewing angle. Hot, Cold, Center Spot, and 2 User Preset measurements, with optional high temperature calibration to 1000 C (1832 F).

Extech EX365 Compact Industrial True RMS Multimeter With Built In NCV

Extech EX365 Compact Industrial True RMS Multimeter With Built In NCV
Extech EX365 Compact Industrial True RMS Multimeter With Built In NCV

Extech EX365 Compact Industrial True RMS Multimeter With Built In NCV. Lo Z prevents false readings caused by ghost voltages. Fast 60-Segment Analog style Bar graph for viewing trends with a 6000 Count LED display. Smart Data Hold freezes the reading on the display and automatically changes if a new reading is 50 counts. continuity beeper with visual alert, smart data hold, peak hold, auto power off with disable, relative mode for capacitance zero and offset adjustment. Extech TL 809 Electronic Test Lead Kit. Featuring highly accurate True RMS measurements, Lo Z for the prevention of false readings caused by ghost voltages, 5% basic accuracy, a 1000 V AC / DC volt range, resistance up to 40 M? Additionally, the EX 365 excels in frequency and capacitance measurements as well as commercial applications which require AC / DC current measurements from 1 m A to 10 Complete with test leads, 9 V battery, holster with tilt stand and built-in magnet. True RMS for accurate AC measurements.

Extech CA3010 Flex Clamp On Adaptor 3000A AC

Extech CA3010 Flex Clamp On Adaptor 3000A AC
Extech CA3010 Flex Clamp On Adaptor 3000A AC

Extech CA3010 Flex Clamp On Adaptor 3000A AC. UL listed with a CAT IV 600 V safety rating. Easy twist clamp cable closure to Lock or Open. Compatible with most multimeters and clamp meters with standard sized banana plug inputs. 7.5 mm cable diameter fits into tight spaces and around large conductors. The CA 3010 is a 3000 A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA 3010 is a 10 inch flexible clamp capable of measuring AC Currents up to 3000 Complete with built-in flex clamp cable, 6.6 ft (2 m) lead with banana plugs and two AAA batteries. Measure AC Current up to 3000 A. Measures AC Current in three ranges.